TY - JOUR ID - TI - The Influence of The Hydraulic Pumps Design Characteristics and Temperature of Mineral Oil on The Stability of Actuator تأثیر الخصائص التصمیمیة للمضخات الھیدرولیكیة ودرجة حرارة الزیت المعدني على استقراریه المستخدم AU - Abdul Karim Swadi Saleh عبد الكریم سوادي صالح AU - Farid Abou Hamed فرید ابو حامد AU - Jafer Mehdi Hasan جعفر مھدي حسن PY - 2014 VL - 32 IS - 10 Part (A) Engineering SP - 324 EP - 337 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Much research dealt with the problem in the pulsation of hydraulic pumps, studies, research and literature for vibration did not interfere with the effect of the medium which make vibrations and effect of temperature on the medium (the indirect effect on mechanical vibration). In this research a practical correlation between pulsation of pumps and temperature, pressure and vibration will be developed. To achieve this goal the hydraulic system was designed and implemented to deduce the effect of the internal design of the three main hydraulic pumps, gear pump, vane pump and piston pump, in conjunction with the high temperature of the mineral oil on the vibration generated by the piston arm and the stability of the actuator. Vibration Meter device used to indicate the vibration at the tip of the arm plunger for hydraulic piston and uploaded with a variable load (spring), as well as a computer-aided reading was recorded. It was shown that the interior design of the pumps had an effective influence on the values of acceleration and speed of vibration, even if convergence frequency pulse outside of the slot pressure pumps. This effect cannot be separated from the oil temperature which affect the increasing values of acceleration and speed of vibration recorded on the tip of the plunger arm (performance of the piston) also the pressure has an effect on the values of acceleration and speed of vibration . The temperature of the mineral oil had a strong influence on the performance of hydraulic systems, at the resonance condition.

تناولت البحوث والدراسات مشكلة النبض في المضخات الهيدروليكية وكذلك تناولت العديد من البحوث والمؤلفات الاهتزازات الميكانيكية، لكنها لم تتناول التأثير للوسط المسبب للاهتزازات وكذلك المؤثرات الأخرى على هذا الوسط ومنها درجة الحرارة (اي التأثير غير المباشر على الاهتزازات الميكانيكية). في هذا البحث سيتم التوصل الى تأثير هذا الوسط وهو الزيت المعدني ووضع الترابط العملي بين النبض للمضخات ودرجة الحرارة والضغط والاهتزازات مع مرجعية نظرية. لتحقيق هذا الهدف تم تصميم وتنفيذ منظومة هيدروليكية لاستنتاج تأثير التصميم الداخلي لثلاث مضخات هيدروليكية أساسية وهي المضخة المسننة والريشية والمكبسية بالتزامن مع ارتفاع درجة الحرارة للزيت المعدني والضغط على الاهتزازات الناتجة على طرف ذراع الكباس أي على استقراريه المستخدم (المشغل) . تم الاستعانة بجهاز قياس الاهتزازات لتحديد الاهتزازات على طرف ذراع الكباس للمكبس الهيدروليكي والذي تم تحميله بحمل متغير عبارة عن نابض ، وكذلك بمساعدة الحاسوب تم تسجيل القراءات . تم التوصل الى ان التصميم الداخلي للمضخات له تأثير فعال على قيم تعجيل وسرعة الاهتزاز حتى وان تقارب تردد النبض الخارج من فتحة الضغط للمضخات وأن هذا التأثير لا يمكن فصله عن درجة حرارة الزيت المعدني حيث تم الاستنتاج ان درجة الحرارة تؤثر على زيادة قيم تعجيل وسرعة الاهتزاز المسجلة على طرف ذراع الكباس أي على اداء المكبس وأن الضغط يؤثر على قيم التعجيل والسرعة عند ثبوت درجة الحرارة . كذلك وجد ان لدرجة الحرارة للزيت المعدني تأثير قوي على الحالة الأكثر سوءاً على أداء المنظومات الهيدروليكية وهي حالة الرنين. ER -