TY - JOUR ID - TI - Adenine as Environmentally- Friendly Corrosion Inhibitor for Stainless Steel in Sodium Chloride Acid Solution الإدينين كمثبط صديق بيئياً لتآكل الفولاذ المقاوم للصدأ في محلول حامضي لكلوريد الصوديوم AU - Wisal A. Isa وصال عبد العزيز عيسى AU - Marwa S. Hussain مروة صباح حسين PY - 2015 VL - 28 IS - 1 SP - 113 EP - 131 JO - Ibn Al-Haitham Journal For Pure and Applied Sciences مجلة ابن الهيثم للعلوم الصرفة والتطبيقية SN - 16094042 25213407 AB - The corrosion behavior and the influence of the concentration of adenine (AD) on the corrosion of 316L stainless steel in 0.6 mol.dm-3 sodium chloride acid solutions were studied. The research was performed in two pH values (pH=2 and pH=4) over the temperature range (293- 308)K. The investigation involved electrochemical polarization method using potentiostatic technique. Tafel polarization study revealed that (AD) acted as a mixed inhibitor. The inhibition efficiency increased with an increase in the concentration of adenine, but decreased with increase in temperature. (efficiency= 87% at 0.01 M AD & at T= 293K). The adsorption of (AD) has been found to occur on the surface of 316L stainless steel according to the Langmuir isotherm. The kinetic and thermodynamic parameters for stainless corrosion and adenine adsorption respectively were determined and discussed.

يتناول موضوع في دراسة كهروكيميائية لسلوك تآكل الفولاذ المقاوم للصدأ نوع (316L) وتأثير تركيز مثبط الإدينين [Adenine (AD)] على اعاقة التآكل في محلول حامضي لكلوريد الصوديوم بتركيز (0.6 mol.dm-3). تم اجراء البحث عند قيمتين للأس الهيدروجيني (pH = 2 وpH = 4) على مدى من درجات الحرارة (293-308 K) كما اشتملت الدراسة على طريقة الاستقطاب الكهروكيميائي (استقطاب تافل) باستعمال جهاز المجهاد الساكن ، إذ تم التوصل عن طريقه الى معرفة سلوك مثبط (AD) بانه يعمل على تقليل كل من التفاعلين الانوديوالكاثودي (mixed inhibitor)، أي إنه يقوم بعملية تثبيط تآكل سبيكة الفولاذ المقاوم للصدأ بكفاءة مقدارها 87%. كما وجد بان الكفاءة تزداد بزيادة تركيز المثبط وتقل بزيادة درجة الحرارة؛ اذ ان قيمة الكفاءة 87% تقع عند تركيز المثبط (AD) المساوي (0.01 M) عند درجة حرارة 293K. كما اوضحت الدراسة ان عملية امتزاز مثبط الإدينين (AD) على سطح الفولاذ المقاوم للصدأ تتبع متساوي درجة الحرارة للامتزاز للانكمير (Langmuir Isotherm for Adsorption).تم حساب ومناقشة المعلمات الحركية والثرموديناميكية لعمليتي تآكل الفولاذ المقاوم للصدأ وامتزاز مثبط AD على التوالي. ER -