TY - JOUR ID - TI - Flexure Revisited: Strength of Singly Reinforced Beams- A Simple Approach مقاومة الانثناء للعتبات الخرسانية أحادية التسليح طريقة مبسطة AU - Raid I. Khalel رائد ابراهيم خليل AU - Nisreen S. Mohammed نسرين صالح محمد AU - Sameh B.T. Shukur سامح بدري طوبيا AU - Kaiss F. Sarsam قيس فؤاد سرسم PY - 2015 VL - 18 IS - 1 SP - 1 EP - 15 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - 181 singly reinforced beam tests available from the literature are investigated to obtain two flexural design methods-one simple proposal and an alternative one that takes into account the influence of rising flexural reinforcement ratio on design. The simple proposal takes significantly less time to apply compared to the alternative one. The former leads to only 0.5% greater COV than the latter. These design methods are compared with four code methods (ACI 318M-11, 318M-99, BS and NZ codes).Based on the ratio of ( being the calculated moment resistance), the two proposal methods give relatively low coefficient of variation (COV) values: 15.9% for the simple method and 15.4% for the alternative method. These compare to COV values of 17.5%, 15.9%, 15.6% and 15.7% for the ACI 318M-11, ACI 318M-99, BS and NZ methods, respectively.One major advantage of the simple design method (Constant value of  = 0.85) is that all 181 tests lead to safe prediction.

تم دراسة نتائج فحوصات 131 عتبة خرسانية أحادية التسليح مأخوذة من بحوث سابقة وذلك للحصول علىطريقتين لتصميم الانثتاء، الاولى طريقة مقترحة بسيطة، اما الثانية فتأخذ بنظر الاعتبار تأثير زيادة نسبة حديد تسليحالانثناء على التصميم. ان تطبيق الطريقة المبسطة يحتاج الى وقت اقصر مقارنة مع الطريقة الثانية، ومعامل التغايرلها اكبر بمقدار 0.0 % فقط من الطريقة الثانية البديلة. لقد قورنت هاتان الطريقتان مع الطرق المعتمدة في اربعمدونات هي ) ACI 318M-11 ، ACI 318M-99 ، BS ، NZ .)بالاعتماد على نسبة مقاومة الانثناء العملية/مقاومة الانثناء المحسوبة Mtest/Mr ، أعطت الطريقتان المقترحتان10.4 % للطريقة المبسطة، 10.1 % للطريقة البديلة. بينما كانت قيم معامل التغاير قيما لمعامل التغاير قليلة نسبيا 5%10.1 و 10.2 % للمدونات الاربع السابقة على التوالي. ،%10.4 ،%12.0هنالك فائدة أساسية عند تطبيق طريقة التصميم البسيطة )باستعمال قيمة ثابتة  0.30 ( وهي ان جميع النماذج ) 131 =نموذجا ( أعطت تقديرا أمينا. ER -