@Article{, title={Effect of Particle Size on Some Mechanical Properties of Functionally Graded Polymeric Matrix Composite Produced by Centrifugal Casting تأثير الحجم الحبيبي في بعض الخواص الميكانيكية لمواد متراكبة بوليميرية متدرجة وظيفياً مصنعة بطريقة الطرد المركزي}, author={Awad Hallosh Khidhir عواد هلوش خضر and Ahmed Akram Abdullah احمد أكرم عبد الله}, journal={AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين}, volume={22}, number={4}, pages={205-215}, year={2014}, abstract={In this research a functionally graded polymeric composites (FGPCs) were produced using centrifugal casting method . These composites were fabricated from unsaturated polyester resin as a matrix reinforced with silicon carbide particles (SiCp) of different particle size (75,106,150 µm) and ( 6vol%)bulk volume fraction, using (600 RPM) mold rotational speeds . The aim of the present research was to study the effect of (SiCp)particle size on local values of volume fraction ,hardness and Young modulus at specific points along the graded samples. Hardness was measured at these points then graded samples were cut to eight portions . Density , volume fraction were calculated, then standard homogenous samples of constant but different volume fractions were manufactured. Results show that local values of volume fraction, hardness and young modulus decreased in nearby positions of the center of rotation and increased in positions far away from the center of rotation.

تم في هذا البحث انتاج مواد متراكبة بوليميرية متدرجة وظيفياً(FGPCs) مادتها الاساس البولي استر غير المشبع(Unsaturated Polyester Resin) ومعززة بدقائق من كربيد السليكون(SiCp) بكسر حجمي كلي (% Vol6) وحجوم حبيبية مختلفة(75,106,150 µm) ومصنعة بطريقة الطرد المركزي وبسرعة دورانية (600 RPM) وبدرجة حرارة الغرفة(22ºC) فضلا عن انتاج أنموذج من البولي استر النقي وبالظروف نفسها لغرض المقارنة. تم دراسة تأثير تغير الحجم الحبيبي للدقائق في القيم الموضعية للكسر الحجمي والصلادة ومعامل المرونة للنماذج المصنعة وفي نقاط محددة على طول كل أنموذج متدرج . تم قياس الصلادة في هذه النقاط ومن ثم تقطيع كل انموذج متدرج الى ثمانية قطع وتحديد كثافتها وحساب كسرها الحجمي وانتاج نماذج متجانسة قياسية لغرض اختبار الشد .اظهرت نتائج البحث انخفاض القيم الموضعية للكسر الحجمي والصلادة ومعامل المرونة في المواضع القريبة من مركز دوران القالب وارتفاع هذه القيم في المواضع البعيدة عن مركز دوران قالب الطرد المركزي مع زيادة الحجم الحبيبي للدقائق.} }