TY - JOUR ID - TI - Residual Compressive and Flexural Strength of Self Compacting Concrete Exposed to High Temperature المقاومة المتبقية للخرسانة ذاتية الرص المتعرضة للحرارة العالية AU - Luma Fadhil H لمى فاضل PY - 2010 VL - 14 IS - 1 SP - 149 EP - 168 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - Self compacting concrete (SCC) can be classified as high performance concrete. As the name suggests, it does not require to be vibrated to achieve full compaction. This offers many benefits and advantages over conventional concrete. This study aims to evaluate the fresh and hardened properties of SCC produced by using locally available materials. This study includes also the influence of different percentages of polypropylene fibers (PPF); added by about (0, 0.5 and 1) % by the total volume, on the same properties. To achieve these aims six different mixes of SCC (with and without fibers) are mixed, tested and evaluated. Also, this study aims to identify the mechanical properties of SCC specimens (with and without fibers) at high temperature, including compressive and flexural strengths. The effect of different heating rates (25, 100, 400 and 700)0C on the mechanical properties of SCC is studied. The difference of the mechanical properties between normal and high strength SCC is identified. The test results show that all the mixes have good consistency and workability from the filling ability and passing ability point of view. Also, the addition of PPF gives a homogeneous and cohesive mix with slight decrease in workability. However, the addition of PPF causes a slight reduction in compressive strength which increased as the percentage of PPF increased, while this addition causes a noticed increment in flexural strength.Also, it is found that compressive and flexural strengths decreased as the heating temperature increased.

تعرف الخرسانة ذاتية الرص بانها خرسانة عالية الاداء, وكما هو واضح من الاسم انها لا تحتاج الى رص ميكانيكى مما يجعلها مميزة ومفضلة عن الخرسانة التقليدية.يهدف هذا البحث الى تقييم الخصائص الطرية والصلبة للخرسانة ذاتية الرص المنتجة باستخدام مواد محلية متوفرة, ايضا يهدف الى توضيح تاثير نسب مختلفة من الياف البولي بروبلين التي اضيفت بمقدار (0-0,5-1,0)% من الحجم الكلي للخرسانة على نفس الخصائص الطرية والصلبة. لتحقيق ذلك, 6 خلطات مختلفة من الخرسانة ذاتية الرص (مع او بدون الياف) تم تصميمها وخلطها وفحصها بالاضافة الى مناقشة النتائج.كذلك يهدف البحث الى دراسة الخصائص الميكانيكية (مقاومة الانضغاط و مقاومة الانحناء) لنماذج الخرسانة ذاتية الرص (مع او بدون الياف)تحت تاثير الحرق فى درجات حرارة مختلفة. حيث تم دراسة تاثير التدرج الحرارى (100,400,700) 0س اضافة الى النماذج التى تم فحصها بدرجة حرارة الغرفة 25 0س ,اضافة الى دراسة الاختلاف فى الخصائص الميكانيكية بين الخلطات المختلفة للخرسانة ذاتية الرص ذات المقاومة الاعتيادية والمقاومة العالية. ايضا وجد ان قابلية التشغيل جيدة كما ان اضافة الياف البولى بروبلين اكسبت خلطات الخرسانة ذاتية الرص قوام متجانس ومتماسك مع انخفاض قليل فى قابلية التشغيل. على اية حال، ان اضافة الياف البولى بروبلين سببت انخفاض قليل فى مقاومة الانضغاط وزيادة ملحوظة فى مقاومة الانحناء. كما وجد ان مقاومة الانضغاط والانحناء انخفضت بشكل واضح عند زيادة درجة حرارة الحرق. ER -