@Article{, title={Removal Efficiency of Sediment by Self-Cleaning of Combined Rectangular Weir with Three Ectangular Bottom Openings by Using ANN}, author={Rafa H.Al-Suhaili and Jabbar H.Al-Baidhani and NassrinJ.Al-Mansori}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={23}, number={2}, pages={420-433}, year={2015}, abstract={This research was based on laboratory experiments for obtaining the sediment removal efficiency for a rectangular weir with three rectangular bottom openings. Thirty-three physical models were made for weir without openings, weir with one opening, weir with three openings, for purpose of comparison. These models were operated under clear-water condition and by using the uniform cohesion less sand as bed material. Dimensional analysis was made to relate the maximum scour depth, width and length of the scour holes created at the upstream and downstream sides of the weir, with different geometrical and flow variables for each flow case. The SMS Software-RMA2 Model was used to obtain the velocity distribution to be related to the simulation of the self-cleaning efficiency for the proposed weir models. The coefficients of variation for the estimated removal efficiency of sediments at both sides were (1.113 -0.465), which indicate the necessity of obtaining a model to describe this variation. Experimental data analysis had shown the flow conditions such as the head difference ,the head over the weir, time, dimensions of openings, number of openings have considerable effect on the scour holes volume at both sides of the weir. ANN models were developed herein using the (SPSS software, version 19) to express the removal efficiencies of sediment both at the upstream and downstream sides of the weir as a function of the different geometrical and flow variables. These obtained ANN models were found to have correlation coefficients range (r=0.989 - 0.803) between the observed and predicted removal efficiencies. These high correlations indicate the capability of these models for a very good predictions. These models were used in a Visual Stuido Net,2010program in order to be used by engineers to find the removal efficiency of such structure.

تم في هذا البحث اعتماد التجارب المختبرية لدراسة النحر الحاصل في مقدم ومؤخرالهدارالمستطيل ذو ثلاث فتحات مستطیلة الشکل فی اسفله،(متساوية الابعاد). تم عمل (33) نموذج مختلف من هذا المنشأ بأختلاف الابعاد لکل من الهداروالفتحات لثلاث حالات مختلفة (للهدار بدون الفتحات السفلية وللهدار بفتحة واحدة وللهدار بثلاث فتحات) لاغراض المقارنة.وضعت هذه النماذج في القناة المختبرية تحت ظروف الجريان الهادئ ( subcritical) والخالي من حمل الرسوبيات (clear water-condition) ،وبأستخدام تربة رملية ذات جزيئات منتظمة وغير متماسكة كمادة للقاع.تم اجراء تحلیل بعدی لأیجاد علاقة لا بعدیة بین(اعلى قيمة لعمق وطول وعرض حفرة النحر عند مقدم ومؤخر الهدار) و متغیرات تمثل ابعاد النموذج و أخرى تمثل الجریان لكل حالة جريان. وتم دراسة نمط توزيع السرع بأستخدام برنامج ( RMA2 ) لتمثيل محاكاة التنظيف الذاتي لنماذج النحر. كما ان قيم معامل التغيير لكل حالات الجريان في تخمين كفاءة الازالة لكلا الجانبين من الهدار كانت (1.113 -0.465 ) مما يشير الى ضرورة الحصول على نموذج لوصف هذا التغيير. من تحليل النتائج المختبرية تبين ان فرق الارتفاع، منسوب المياه اعلى الهدار،الوقت، عدد وحجم الفتحات ،من العوامل المؤثرة في حجم حفرة النحر في كلا الجانبين من الهدار. يقوم نموذج ( ANN ) بأيجاد كفاءة الازالة للرسوبيات في مقدم ومؤخر الهدار كدالة لمختلف المتغيرات المتعلقة بالابعاد الهندسية الخاصة بالنموذج والمتغيرات التي تمثل الجريان بقيم معامل ارتباط لكل الشبکات يتراوح بين (r=0.989-0.803) لكفاءة الازالة المحسوبة والمقاسة .تشيرالقيم العالية للارتباط الى امكانية التنبؤ العالي للموديل كما تم بناء نموذج (Visual Studio Net,2010) لغرض استخدامه من قبل المهندسین لأیجاد كفاءة الازالة للرسوبيات لجميع النماذج.} }