@Article{, title={A Theoretical Procedure for Estimating Saturation Temperature Inside Solar Two-Phase Loops دراسة نظرية لتخمين درجة حرارة التشبع داخل الدورات الشمسية ثنائية الطور}, author={Khalid Ahmad Joudi خالد احمد الجودي and Aouf Abdulrahman Al-Tabbakh عوف عبد الرحمن احمد الطباخ}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={19}, number={4}, pages={219-248}, year={2015}, abstract={This work presents a theoretical analysis for the prediction of refrigerant saturation temperature inside a typical solar two-phase loop. This loop may be incorporated in any solar heating system for transporting heat between the solar collector and storage tank. The procedure takes into account all influencing parameters such as:- solar irradiance, ambient temperature, heat transfer coefficients in the source (collector) and sink (condenser), collector fill ratio and the geometric parameters of the solar collector and condenser.The trend of change of saturation temperature was studied over a typical daytime period extending 8 hours. Mathematical models were formulated for the collector and condenser to take into account the most influencing parameters. The models are highly interrelated which required an iterative procedure. A computer program was built to implement the iterative procedure and simulate the change of saturation temperature during the studied period. The period was divided into small time intervals of 10 seconds.Results reveal a significant influence of condenser area, collector fill ratio and the working conditions on the calculated saturation temperature. Optimum conversion of energy occurs at a fill ratio of 0.85 at which saturation temperature is about 40oC for the system under consideration.

يتناول هذا البحث دراسة نظرية تهدف إلى تخمين درجة حرارة التشبع لمائع تبريد يجري داخل دورة شمسية نموذجية ثنائية الطور. يمكن استعمال دورات كهذه في أية منظومة تسخين شمسية لغرض نقل الحرارة بين المجمع الشمسي وخزان الماء. وقد جرى في هذه الطريقة تناول كل العوامل المؤثرة على الأداء مثل :- شدة الإشعاع الشمسي ودرجة حرارة الجو ومعاملات انتقال الحرارة في المجمع والمكثف إضافة إلى نسبة ملىء المجمع وأبعاده مع أبعاد المكثف.تم دراسة نمط تغير درجة حرارة التشبع خلال فترة نهارية نموذجية تمتد 8 ساعات حيث تم صياغة نماذج رياضية لتمثيل كل من المجمع الشمسي والمكثف تشتمل معظم العوامل الرئيسية المؤثرة على الأداء. إن النماذج الرياضية متداخلة مع بعضها مما يوجب إيجاد حل يعتمد التجربة والخطأ. لذا تم بناء برنامج حاسوبي لحل هذه المسألة المترابطة حلا يعتمد التجربة والخطأ ويخمن درجة حرارة التشبع للمائع الشغال خلال فترة المحاكاة النظرية السالفة الذكر. وقد تم تقسيم الفترة إلى فترات قصيرة بطول 10 ثواني.أظهرت النتائج تأثيرا ملحوظا لكل من مساحة المكثف ونسبة ملىء المجمع وظروف التشغيل على القيمة المحسوبة لدرجة حرارة التشبع. وظهر ان التحويل الأمثل للطاقة يتم عند نسبة ملىء 0.85 ودرجة حرارة تشبع مقدارها 40 درجة مئوية للمنظومة قيد الدراسة.} }