@Article{, title={Effect of Recirculation Ratio on the Uniformity Flow in a High Area Ratio of Outlets Pipe at Different Entrance flow rates تأثير نسبة إعادة التدوير على توحيد التدفق في انبوب متعدد المنافذ ذو نسبة مساحة عالية عند معدلات تدفق مختلفة}, author={Wissam H. Alawee وسام حميد عليوي and Jafar M. Hassan جعفر مهدي حسن and Wahid S. Mohammad وحيد شاتي محمد}, journal={Journal of Engineering مجلة الهندسة}, volume={21}, number={9}, pages={169-184}, year={2015}, abstract={The uniform flow distrbiution in the multi-outlets pipe highly depends on the several parameters act togather. Therefor, there is no general method to achieve this goal. The goal of this study is to investigate the proposed approach that can provide significant relief of the maldistribution. The method is based on re-circulating portion of flow from the end of the header to reduce pressure at this region . The physical model consists of main manifold with uniform longitudinal section having diameter of 152.4 mm (6 in), five laterals with diameter of 76.2 mm (3 in), and spacing of 300 mm. At first, The experiment is carried out with conventional manifold, which is a closed-end. Then, small amount of water is allowed by controling the valve located at the end of the manifold slowly. The pressure and the flow distribution among the lateral pipes were recorded. Different inlet flows have been tested and the values of these flows are (625, 790, and 950) l/min. The result reveals that the conventional header give high non-uniform flow distrbution and the distribution of flow is greatly improved by using the perposed methods . When the recircluting ratio is of 15%, the non-uniform coefficient (the stander devation) is reduced from 0.48 to 0.13 which means improves in the flow distribution by 75%.

التوزيع المنتظم للجريان خلال الانابيب متعددة المنافذ يعتمد بشكل كبير على العديد من المتغيرات التي تؤثر بشكل مجتمع. لذلك لا توجد هناك طريقة محددة لتحقيق هذا الهدف. البحث الحالي هو تطوير لطريقة مقترحة يمكن ان تقلل من سوء توزيع الجريان. تستند هذه الطريقة على سحب نسبة محددة من المائع من النهاية المغلقة للانبوب المتفرع وذلك لتقليل الضغط المرتفع في هذه المنطقة. يتكون مقطع الاختبار المستخدم في البحث من انبوب رئيسي بقطر (152.4 ملم) وخمسة انابيب فرعية بقطر (76.2 ملم)، المسافة بين الانابيب الفرعية كانت (300 ملم). أنجزت التجارب في البداية على مقطع الاختبار بالتصميم التقليدي (النهاية مغلقة) بعد ذلك يتم السماح لكميات مختلفة من الماء من المرور من النهاية المغلقة من خلال صمام تحكم مثبت في نهاية الانبوب. استخدمت ثلاثة قيم مختلفة لكمية التدفق الداخل خلال التجارب وهي (625، 790، 950) لتر/ثانية. بينت النتائج ان عملية سحب جزء من الماء من النهاية المغلقة للانبوب المتفرع يساهم الى حد كبير في تحسين توزيع الجريان، حيث انه عند نسبة اعادة تدوير مقدارها (%15) قلت قيم معامل الانحراف من 0.48 الى 0.13، وهذا يحسن من توزيع الجريان بمقدار %75.} }