@Article{, title={Experimental study of increasing energy dissipation on stepped spillway دراسة عملية لزيادة تشتيت الطاقة في المطافح المدرجة}, author={Thulfikar Razzak Al- Husseini}, journal={journal of kerbala university مجلة جامعة كربلاء}, volume={13}, number={3}, pages={87-100}, year={2015}, abstract={An experimental study was conducted on flat sloped and stepped spillways in order to specify the efficiency of energy dissipating of flow and then trying to improve that as a new and novel study. Twelve spillways were constructed from plywood and tested to compare between flat sloped and stepped spillways first, and as a conclusion in this study and many previous papers (which is when increasing discharge the energy dissipation decreasing), so it can be choosing the most effective one that dissipate energy at high discharges and try to modify it using two cases of blocks and one case of cascade for increasing energy dissipation secondly , so three downstream slopes of stepped face (θ = 27 o, 32 o , and 40 o) were tested with flat sloped, stepped having two steps, and stepped having four steps. The results showed that when decreasing both number of steps and downstream slops stepped face of the spillway will cause an increase of the ratio of flow energy dissipation, and the stepped spillways are more efficient in flow energy dissipation compared with flat sloped spillways, also when using cascade spillway the energy dissipation will decrease compare with original step spillway that have the same characteristics and increased when using blocks.

تم عمل دراسة مختبرية على المطافح المدرجة والغير مدرجة لتحديد كفائتها في تشتيت طاقة الجريان وبعد ذلك المحاولة لتحسين كفائتها. تم عمل اثنا عشر نموذج من المطافح باستخدام مادة الخشب المقاوم للماء وتم اختبارها للمقارنة بين المطافح المدرجة و الغير مدرجة اولا وثم بعد الاستنتاج في هذا البحث وبدلالة عدة بحوث سابقة ( انه كلما زاد التصريف يقل مقدار تشتيت الطاقة) لذلك بالامكان اختيار افضل نموذج يشتت الطاقة اكثر بالتصاريف العالية لمحاولة تحسين اداءه لغرض تشتيت طاقة اكبر باستخدام حالتين من العوارض وحالة من سلسلة المطافح ثانيا لذلك تم اختيار ثلاث ميول لاوجه المطافح المدرجة وغير المدرجة ( θ= 27 درجة, 32 درجة , و 40 درجة) وتم استخدام عدد درجات للمطافح المدرجة هو اثنان و اربعة. بينت النتائج انه عند تقليل كلا من عدد درجات وزاوية ميلان الوجه للمطافح المدرجة يؤدي الى زيادة تشتيت الطاقة وكذلك ان المطافح المدرجة تكون اكثر تشتيتا للطاقة من المطافح غير المدرجة بالاضافة الى انه عند استخدام سلسلة المطافح فان تشتيت الطاقة يقل مقارنة بالمطافح المدرجة الاصلية التي لها نفس المواصفات وكذلك فان تشتيت الطاقة يزداد عند استخدام العوارض.} }