@Article{, title={THEORATICAL ANALYSIS OF FLAT PLATE SOLAR COLLECTOR PLACED IN MOSUL CITY BY USING DIFFERENT ABSORBING MATERIALS AND FLUIDS دراسة نظرية لمجمعات شمسية ذات صفائح مستوية موضوعة في مدينة الموصل باستخدام معادن وموائع مختلفة}, author={Hasson S. Hamood حسون شعبان حمود and Badran M. Salim بدران محمد سالم and Nabeel M. Abdulrazzaq نبيل مخلف عبدالرزاق}, journal={KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية}, volume={6}, number={2}, pages={1-12}, year={2015}, abstract={In this paper, a mathematical model and simulation of flat plate solar collector are developed. The weather data, which used in the calculations of the performance of the collector, is for Mosul city. Detailed energy analyses were carried out for evaluating the efficiency and useful heat gain of a typical flat plate solar collector under certain operation and design conditions. In this analysis, different fluids and different absorbing materials were used to indicate there affect on the performance of flat plate solar collector. Operating parameters, which considered as variables, are the mass flow rate, the inlet and the outlet temperature difference and the total solar radiation flux. The simulation program had written by using EES (Engineering Equation Solver) software program. The results of this analysis show that the copper and aluminum give a good efficiency up to 0.6 with value (ΔT/GT = 0.03) with water as a working fluid, while the plain carbon steel gives less than the number that stated previously. The results show also that the copper and the aluminum give the largest useful heat gain extracted from the collector as compared with plain carbon steel. It has been also show that the solar collector efficiency is higher in case of using water as working fluid than that of propylene glycol solution.

يتضمن البحث الحالي إنشاء نموذج رياضي لمجمعات شمسيه ذات صفائح مستوية بغرض محاكاة النموذج الواقع تحت تأثير أجواء مدينة الموصل من درجات الحرارة العظمى والصغرى بغرض تحديد كفاءة تلك المجمعات الشمسية. حيث تم اجراء تحليل مفصل للطاقة الشمسية بغرض تقييم كفاءة هذه المجمعات الشمسية و الحرارة النافعة المكتسبة تحت ظروف تشغيلية وتصميمية معينة. تم أستخدام الماء ومحلول البروبلين كلايكول كموائع تشغيل في المنظومة قيد الدراسة بينما أستخدم النحاس و الالمنيوم و الصلب الكاربوني كمعادن للصفائح الماصة للحرارة في المجمع الشمسي. تم أختبار معدل الجريان الكتلي للمائع والتغير في درجة حرارة المائع الداخل والخارج من المجمع الشمسي بالإضافة الى التغير في مقدار فيض الاشعاع الشمسي كظروف تشغيلية للمنظومة. تم بناء برنامج حسابي لمحاكاة المجمع الشمسي وذلك باستخدام الوسط )ولقد أظهرت النتائج المستحصل عليها من خلال البرنامج أن أستخدام النحاس EESالبرمجي لحل المعادلات الهندسية ( عندما تكون قيمة 0.6 والالمنيوم كصفائح ماصة للحرارة تعطي أعلى كفاءة يصل مقدارها إلى (ΔT/GT=0.03) كما أظهرت النتائج أ ، باستخدام الماء كمائع تشغيل في المنظومة ن النحاس والالمنيوم يعطون أعلى كمية من الطاقة ًأيضا النافعة بالمقارنة مع الصلب الكاربوني بالاضافة الى أستنتاج أن استخدام الماء كمائع للتثليج اعطى كفاءة اعلى مقارنة مع البروبلين كلايكول.} }