@Article{, title={Stability Improvement Of the (400kV) Iraqi Grid using the best FACTS Devices تحسين إستقرارية منظومة الشبكة العراقية (KV 400) بأستعمال افضل جهاز من اجهزة ال FACTS))}, author={Rashid H. Al-Rubayi and Shaimaa Sh. Abd Alhalim}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={7 Part (A) Engineering}, pages={1598-1618}, year={2015}, abstract={Electrical power system has become large and complicated, so it is subjected to sudden changes in load levels. Stability is an important concept which determines the stable operation of the power system.The modern trend is to employ by installing Flexible Alternating Current Transmission System (FACTS) devices in the system for effective utilization of transmission resources.The FACTS devices contribute to the power flow improvement besides, they extend their services in transient stability improvement as well, study and analyze the stability of the system through rotor angle and voltage .The object of this work is to improve the stability of the Iraqi National Super Grid System (INSGS) by using optimal FACTS devices in different optimal locations under fault conditions.Two test systems are studied, the first system is IEEE or WSCC (9-bus bars), and the second system is the Iraqi (400 KV) electrical network 24-bus bars.The load flow program was implemented using the Newton-Raphson method and the numerical solutions of non-linear differential equations are solved using Trapezoidal method.A comparison has been made between five types of FACTS (UPFC, SSSC, TCSC, SVC, STATCOM) at optimal location of the Iraqi grid and (9-bus bars) to get optimal FACTS devices by (voltage stability, rotor angle ).The results obtained showed that the installation of Unified Power Flow Controller (UPFC) is optimal devices for an improvement of the stability by damping the voltage and rotor angle oscillations.

يعتبر نظام القدره الكهربائيه من الانظمه الضخمه والمعقده لاحتوائها على عدد كبير من محطات التوليد وخطوط النقل وأجهزة السيطرة لذلك فانه يخضع الى تغيرات مفاجئه في مستويات الحمل ، حيث اصبح من الصعب جداً الحفاظ على نظام مستقرمع التغيرات التي يشهدها النظام, لذلك فمن المهم جداً تحسين أستقرارية منظومة القدرة.التطور الحديث في نظام القدره الكهربائيه هو عن طريق تنصيب اجهزة ال(FACTS ) في اماكن مثاليه مختلفه حيث تساهم هذه الاجهزه الكهربائيه في تحسين تدفق القدره الكهربائيه الى جانب تحسين الاستقرارية العابره عن طريق الفولتية وزاوية الدوار الغرض من هذا العمل هو تحسين استقرارية منظومة القدرة للشبكة العراقية عن طريق استخدام افضل جهاز للـ(FACTS) ونصب هذه الاجهزه في اماكن مثاليه مختلفة تحت ظرف الخطأ تم دراسة منظومتان, المنظومة الأولى هي(IEEE or WSCC ) المكونة من (9) عقدة والمنظومة الثانية هي الشبكة الوطنية العراقية( 400 KV) المكونه من (24) عقدة ,في المنظومتان تم اختبار عطل ثلاثي الأطوار عند مواقع مختلفة و حالات مختلفة (عطل وقتي, عطل دائم) . تم في هذا البحث دراسة وتكوين برنامج لسريان الحمل(Load Flow) باستخدام طريقة (Newton-Raphson) وتم حل المعادلات التفاضلية الغير خــطـيــــة باســتــخــدام الطـرق العــدديــــــة وذلـك باســتــخــدامطــريـقــة (Trapezoidal) . البرامج المستخدمة في هذا البحث تم تطبـيـقــهــا باستخدام برنامج MATLAB (7.11.0.584 ) اصدار(R2010b) المبني على اساس برامجيات (PSAT version 2.1.6)( 2002-2010 (©. في هذا البحث تم المقارنه بين خمسة انواع من ال FACTS)) هي UPFC, SSSC, TCSC, SVC, STATCOM)) وتنصيبها في اماكن مثالية ومختلفه في الشبكه الوطنيه العراقية ومنظومة (9) عقدة للحصول على جهاز مثالي لتحسين القدره المنقوله والمقارنة تمت عن طريق الفولتية وزاوية الدوار.} }