TY - JOUR ID - TI - The Effect of Adding Waste Plastic Fibers on some Engineering Properties of Roller Compacted Concrete تاثير اضافة الياف الفضلات البلاستيكية على بعض الخواص الهندسية للخرسانة المحدولة بالرص AU - Adil N. Abed ا.م.د.عادل نهير عبد AU - Abdulkader I. Al-hadithi ا.م.د.عبدالقادر اسماعيل الحديثي AU - Ahmed Salie Mohammed احمد صالح محمد PY - 2016 VL - 10 IS - 1 SP - 31 EP - 39 JO - Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية SN - 19927428 2706686X AB - This research includes producing compacted concrete by rolling method and the possibility for using in highway construction field with studying the influence of adding waste plastic fiber resulting from manual cutting for bottles used in the conservation gassy beverage on different characteristics of this type of concrete. For the purpose of selecting mix proportions appropriate for rolling compacted concrete (RCC). Approved design method for ACI-committee (5R-207 .1980) was selected for this research.Destroying plastic waste by volumetric rates ranging between (0.5%) to (2%) was approved. Reference mix was produced for comparison. Tests were conducted on the models produced from rolling compacted concrete like compressive strength, flexural strength and split tensile strength. The analysis of the results showed that the use of plastic waste fibers (1%) has led to improve the properties of each of the compressive strength and flexural strength and split tensile strength compared with reference concrete. Compressive strength in 28 days with fiber ratio (1%) is higher than (52.15%) from compressive strength in 28 days of reference concrete. It can be also observed that each of the flexural strength and split tensile strength increases by (17.86, 25.61)%, respectively, from flexural strength and split tensile strength for the reference mix

يتضمن هذا البحث انتاج الخرسانة المحدولة بالرص وإمكانية استخدامها في مجال انشاء الطرق مع دراسة تاثير اضافة الياف الفضلات البلاستيكية الناتجة عن التقطيع اليدوي للقناني المستخدمة في حفظ المشروبات الغازية على الخواص المختلفة لهذا النوع من الخرسانة لغرض اختيار نسب الخلط المناسبة للخرسانة المحدولة بالرص (RCC). تم اعتماد طريقة التصميم المعتمدة من قبل معهد الخرسانة الامريكي-اللجنة (5R-207 .1980). لقد تم اعتماد الياف الفضلات البلاستيكية بنسب حجمية تتراوح قيمتها بين (0.5%) الى (2%) . كما تم انتاج خرسانة مرجعية لغرض المقارنة. تم اجراء الفحوصات على النماذج المنتجة من الخرسانة المحدولة بالرص كفحوصات مقاومة الانضغاط , مقاومة الانثناء ,مقاومة الشد بالانشطار. لقد أظهر تحليل النتائج ان استخدام الياف الفضلات البلاستيكية بنسبة (1%) قد ادى الى تحسين خواص كل من مقاومة الانضغاط ومقاومة الانثناء ومقاومة الشد بالانشطار مقارنةَ بالخلطة المرجعية . مقاومة الانضغاط في 28 يوم عند استخدام نسبة الياف (1%) اعلى بمقدار (52.15 %) من مقاومة الانضغاط المرجعية كذلك يمكن ملاحظة بان كل من مقاومة الانثناء ومقاومة الشد بالانشطار تزداد بمقدار (17.86, 25.61)% على التوالي من مقاومة الانثناء ومقاومة الشد بالانشطار عن الخلطة المرجعية. ER -