@Article{, title={Study of Some Mechanical Properties for Aluminum Reinforced by Alumina Fibers}, author={Shaker Jahel Eddres and Ali Hubi Haleem and Newal Muhammad Dawood}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={23}, number={3}, pages={607-615}, year={2015}, abstract={The aim of this research was to study the ability of improving the impact resistance and Vickers microhardness of composite material based on aluminum metal reinforced by 5, 10, and 15wt.% of chopped alumina fibers. Stirring casting method has been used to make composite material by using vortex technique which is used to pull the chopped alumina fibers to inside the melted aluminum and distributed them homogeneously.Regarding the impact test, results shown that the impact resistance of the composite material are more than that in the aluminum metal and these values are increased with increasing of the amount add fibers and they reached maximum values at (10 wt. %). Then they are decreased at (15 wt. %) but these values remain at higher values than that in the aluminum metal. While the Vickers microhardness reached maximum values at (15 wt. %).

يهدف البحث الحالي إلى دراسة تحسين مقاومة الصدمة و صلادة فيكرز المايكروية لمادة مركبة ذات أساس من معدن الألمنيوم مقوى بألياف الألومينا المقطعة وبنسب وزنية (5%, 10%, 15%). وتم استخدام طريقة السباكة بالمزج في تصنيع المادة المتراكبة باستخدام تقنية الدوامة والتي تعمل على سحب ألياف الألومينا ألمقطعه إلى داخل منصهر معدن الألمنيوم وتوزيعها خلاله بشكل متجانس.أظهرت نتائج اختبار الصدم إن مقاومة الصدمة للمادة المركبة أعلى مما هي عليه لمعدن الألمنيوم وتزداد هذه القيم مع زيادة النسب الوزنية لألياف الألومينا والى حد (10%) ثم تسلك سلوكا مغايرا لكنها تبقى محافظة على قيم أعلى مما هي عليه لمعدن الألمنيوم . في حين تصل صلادة فيكرز المايكروية أعلى قيمها عند التقوية بألياف الألومينا المقطعة وبكسر وزني ((15%.} }