TY - JOUR ID - TI - Effect Of RPC Compositions On: Compressive Strength and Absorption AU - Ahmed Sultan Ali PY - 2016 VL - 24 IS - 1 SP - 26 EP - 37 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Concrete is a critical material for the construction of infrastructure facilities throughout the world. A new material known as Reactive Powder Concrete (RPC), or sometimes called Ultra-High Performance Concrete (UHPC), is becoming available that differs significantly from traditional concretes. It is an ultra high strength and high ductility composite material with advanced mechanical properties. It consists of special concrete whose microstructure is optimized by precise gradation of all particles in the mix to yield maximum density.Different RPC mixes in the experimental investigation of the present study the mechanical properties of RPC including compressive strength, density and absorption.The main variables used in the production of the different RPC mixes of the present research are three, namely, type of pozzolanic admixture (metakaolin, micro silica, and silica fume), type of fibers (steel and polypropylene fibers) and volume fraction of fibers (1.0,1.5, and 2.0)%.The experimental results indicated that RPC mixes with silica fume gave the highest values of compressive strength and density and lowest value of absorption in comparison with RPC using micro silica or metakaolin where metakaolin was the third in such comparisons. However the RPC mixes used in the present investigation gave group compressive strength ranging between 164 -195 MPa.It was also found that the use of steel fibers with high volume fraction (2%) in an RPC mix increases the compressive strength by 8% and density of the concrete by 2.5% and reduces its absorption by 13%, unlike an RPC mix using polypropylene fibers of lesser volume fraction.

تعتبر الخرسانة من المواد الإنشائية المهمة في جميع أنحاء العالم، ويتوفر منها الآن نوع جديد يسمى خرسانة المساحيق الفعالة (Reactive Powder Concrete, RPC ) ويسمى أيضا بالخرسانة فائقة الأداء (Ultra High Performance Concrete UHPC ) حيث أنها تختلف كثيرا عن الخرسانة التقليدية. تمتاز هذه الخرسانة الجديدة بمقاومتها العالية وديمومتها ومرونتها الكبيرة وخواصها الميكانيكية الجيدة, حيث يراعى التدرج المثالي لمساحيقها لجعلها عالية الكثافة.تم في هذا البحث إجراء فحوصات مختبرية على خلطات مختلفة من هذه الخرسانة للتعرف على بعض الخواص الميكانيكية المهمة لهذه الخرسانة مثل مقاومة الانضغاط والكثافة والامتصاص . تم اعتبار وجود ثلاث متغيرات رئيسية عند تصنيع خلطات مختلفة من خرسانة RPC في هذا البحث وهي على الترتيب : نوع مادة البوزولانا المستخدمة (ميتاكائولين، مايكروسليكا، أو سيليكافيوم) ونوع الألياف المستخدمة (ألياف فولاذية أو ألياف البولي بروبلين) والنسبة الحجمية للألياف (1.0 1.5, 2.0) %. أظهرت النتائج بان استخدام السليكافيوم في الخلطة الخرسانية يزيد من مقاومتها الانضغاطية وكثافتها ويقلل من درجة امتصاصها ، مقارنة بالنوعين الآخرين من البوزولانا (وهما المايكروسليكا والميتاكاؤلين) حيث يأتي الميتاكاؤلين ثالثا في هذه المقارنات. ان مقاومة الانضغاط التي تم الحصول عليها في هذا البحث لخرسانة المساحيق الفعالة تتراوح بين (195–164) MPa . لقد وجد أيضا بان استخدام ألياف فولاذية بنسبة حجم عالية(%2) في خلطة خرسانة RPC سوف يكسب الخرسانة مقاومة أنضغاط وأنحناء وكثافة أعلى بينما الخرسانة الحاوية على ألياف البولي بروبلين بنسبة اقل تكون ذات مقاومة أنضغاط وأنحناء وكثافة أقل. ER -