TY - JOUR ID - TI - Experimental Study for Hydraulic Characteristics of Flow over Compound Regular Notches AU - Imad Habeeb Obaed AU - Nabeel Hasan Ali Al-Salim AU - Tha’ir Jabbar Mizhir Al-Fatlawi PY - 2016 VL - 24 IS - 1 SP - 38 EP - 55 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - The hydraulic relationships of flow through notches of different common shapes were investigated in this study. The hydraulic performance of notches were carried out experimentally, by using eight models, the effect of various shapes of notches to specify a range of hydraulic parameters such as coefficient of discharge Cd, energy dissipation ratio E%, and self-aeration of notch AE%. The experimental results of this study showed that the dissipation energy corresponding to V-notches is larger than resulted from rectangular notches. For compound notches of rectangular and triangle, a turbulence in flow increases as the angle of lower notch decreases. Thus, this type with (=120) is the most efficient between the studied models, which gives dissipation of flow energy ratio of (35.86%) for strong hydraulic jump, and (20.7%) for steady jump type. In addition, this type improved the self-aeration of flow given by ( %), a percent of 35.53 is measured. This work also reveal that length of roller and the length of hydraulic jump were directly proportional to the angle of compound notch. Depending on statistical basis, this study derived set of empirical relationships to estimate coefficient of discharge, energy dissipation ratio, and reduction of hydraulic jump length ratio with acceptable values of coefficient of determination

لغرض دراسة الخواص الهيدروليكية لفتحات مركبة من اشكال منتظمة، تم في هذا البحث تقييم الأداء الهيدروليكي لتلك الفتحات مختبريا وذلك باستخدام ثمانية نماذج، وقد تم دراسة تأثير الاشكال المختلفة من الفتحات لتحديد مجموعة من المعلمات الهيدروليكية مثل معامل التصريف (Cd) والنسبة المئوية لتبديد طاقة الجريان (E%) ونسبة التهوية للفتحات (AE%). أظهرت النتائج المختبرية بان النسبة المئوية لتبديد طاقة الجريان للفتحات القياسية المثلثة الشكل تكون أكبر منها في حالة الفتحات المستطيلة. في حالة الفتحات المركبة (المستطيلة والمثلثة الشكل) فان اضطراب الجريان يزداد كلما قلت زاوية الثلمة المثلثة، لهذا السبب فان الفتحات المركبة المستطيلة والمثلثة الشكل ذات الزاوية (θ=120) هي الأكثر كفاءة بين النماذج المدروسة، والتي تعطي نسبة تبديد الطاقة بمقدار (35.86%) للقفزة الهيدروليكية القوية و(20.70%) للقفزة الهيدروليكية المستقرة، بالإضافة الى ذلك فان هذا النوع من الفتحات قد زاد من نسبة تهوية الجريان بمقدار (35.53%). بينت النتائج ان كلا من طول الدوامة وطول القفزة الهيدروليكية يتناسب طرديا مع زاوية الثلمة في الفتحات المركبة. تم في هذه الدراسة اشتقاق مجموعة من العلاقات التجريبية احصائيا لتقدير معامل التصريف، ونسبة تبديد الطاقة، ونسبة تقليص طول القفزة الهيدروليكية ذات القيم المقبولة من معامل التحديد (مربع معامل الارتباط). ER -