TY - JOUR ID - TI - Nonlinear Analysis of Spliced Continuous RC Girders Strengthened with (CFRP) Laminates using ANSYS AU - Ammar Yasir Ali AU - Mohammed Mansour Kadhum AU - Haider Ali Al-Tameemi PY - 2016 VL - 24 IS - 1 SP - 71 EP - 84 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper presents the details of the finite element analysis of spliced continuous reinforced concrete girders. Five spliced continuous girders and one non-spliced continuous girder were analyzed using the ANSYS program. Each spliced girder consisted of three precast segments spliced at two cast-in-place joints at the inflection points, using splices of hooked dowels. Three spliced girders were strengthened using different schemes of the carbon fiber reinforced polymer (CFRP) laminates. The concrete was modeled using (SOLID65) eight-node brick element and the steel reinforcement was modeled discretely using (LINK8) spar element. The straight parts of the spliced bars were modeled using discrete representation with interface elements using (COMBIN39) elements to represent the bond-slip behavior while the hooked part of each spliced bar was replaced by a single spring element. The CFRP laminates were modeled using (SHELL41) shell element. The interfaces between the precast concrete segments and the joints were modeled using CONTAC52 interface elements in conjunction with vertical spring elements to represent the dowel action of the steel bars that crossing the interfaces. The ANSYS model succeeded to an acceptable degree in predicting the structural behavior of the analyzed spliced girders with average of differences of about 6% between the predicted and experimental ultimate load.

تقدم هذه الورقة تفاصيل التحليل بواسطة العناصر المحددة للروافد الخرسانية المسلحة الموصولة المستمرة الاسناد. تم تحليل خمسة روافد موصولة مستمرة الاسناد بالإضافة الى رافدة واحدة غير موصولة مستمرة الاسناد بواسطة برنامج ال (ANSYS). كل رافدة موصولة تتكون من ثلاث قطع مسبقة الصب يتم توصيلها مع بعضها عن طريق وصلتين يتم صبهما موقعيا في منطقتي نقطتي انقلاب العزوم من خلال تراكب الاسياخ المعكوفة. ثلاثة روافد مصولة تمت تقويتها باستعمال تشكيلات مختلفة من اشرطة الياف الكاربون البوليميرية (CFRP). تم تمثيل الخرسانة بواسطة عناصر طابوقية ذات ثمانية عقد (SOLID65) وتم تثميل اسياخ حديد التسليح بواسطة عناصر وتدية (LINK8). الأجزاء المستقيمة من الاسياخ المتراكبة تم تمثيلها عدديا بعقد منفصلة ترتبط بعقد الخرسانة من خلال عناصر وسيطية (بينية) من نوع (COMBIN39) وذلك لتمثيل سلوك الترابط-الانزلاق. اما بالنسبة للجزء المعكوف من كل سيخ فقد تم تمثيله بعنصر زنبركي (Spring Element). اما اشرطة الـ (CFRP) فقد تم تمثيلها بواسطة عناصر قشرية نوع (SHELL41). ان مفاصل التقاء الاوجه بين القطع الخرسانية المسبقة الصب والوصلات المصبوبة موقعيا قد تم تمثيلها باستعمال عناصر وسيطية (بينية) من نوع (CONTAC52) بالتزامن مع عناصر زنبركية عمودية لتمثيل مقاومة الاسياخ الفولاذية المارة خلال هذه المفاصل للحركة العمودية. ER -