@Article{, title={A Study of the Effect of (Cutting Speed, Feed Rate and depth of cut) on Surface Roughness in the Milling Machining دراسة تأثير ( سرعة القطع، معدل التغذية وعمق القطع ) على خشونة السطح في عملية التفريز}, author={Ahmed Basil Abdulwahhab}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={8 Part (A) Engineering}, pages={1785-1797}, year={2015}, abstract={The purpose of this research is to investigate the effect of the main factor of the surface roughness in aluminum alloy (Al-2024) as a workpiece and face milling machining by using computer numerical controlled milling machine with 50 millimeter diameters of the tool with triple cutting edges of carbides. The controlled factors were the speed, feed rate and the depth of cut and this factors effect on the surface roughness. The result of the tests showed that the surface roughness was likely to reduce when the cutting speed increase. It is found the surface roughness is increase with increasing both of feed rate and depth of cut. then drawing a charts illustrate the relationship between variables (cutting speed, feed rate and depth of cut) with surface roughness and analysis resulting data by utilizing the SPSS software to predicted surface roughness by using milling machining parameters and graphical analysis of the obtained data, The percentage of accuracy was 96%.

الغرض من هذا البحث دراسة تأثير العامل الرئيسي لخشونة السطح عند تشغيل سبيكة المنيوم (المنيوم-2024) كمشغولة وعملية تفريز وجهية بأستخدام ماكنة تفريز ذات التحكم الرقمية بواسطة الحاسوب مع استخدام عدة قطع بقطر 50 ملميتر بحافات قطع ثلاثية من الكاربيد. عوامل السيطرة كانت السرعة، معدل التغذية وعمق القطع وهذه العوامل تؤثر على خشونة السطح. اظهرت نتائج الأختبارات ان خشونة السطح من المحتمل ان تقل مع زيادة سرعة القطع. ووجد ان خشونة السطح تزداد مع زيادة كل من معدل التغذية وعمق القطع. وتم رسم مخططات توضح العلاقة بين المتغيرات (سرعة القطع، معدل التغذية وعمق القطع) مع خشونة السطح وتم تحليل وتخمين النتائج بأستخدام برنامج SPSS لتقدير خشونة السطح بواسطة متغيرات عملية التفريز وتحليل البيانات التي تم الحصول عليها وقد كانت النسبة المئوية للدقة 96%.} }