TY - JOUR
ID -
TI - COMPARISON STUDY OF THE SHEAR BOND STRENGTH BETWEENPOLYETHER AND ADDITION SILICONE IMPRESSIONMATERIALS
AU - Saad F. Oboudi
PY - 2009
VL - 12
IS - 3
SP - 56
EP - 63
JO - Al-Nahrain Journal of Science مجلة النهرين للعلوم
SN - 26635453 26635461
AB -
Abstract
The impression material is used mainly in the area of removable partial and complete denture
and in the construction of inlays, crowns and bridges. They are used also in dental laboratories for
duplicating master casts.
Recent studies have evaluated the bond strength of selected impression materials. This research
was performed to study the shear bond strength of impression materials to tray by testing forty
samples, each of which consisted of two blocks of acrylic with the impression material sandwiched
between them. Tray adhesive was used to increase adhesion between impression material and
custom tray. Also this research showed that by the use of perforation impression materials adhere
firmly to the impression trays. Therefore perforation - adhesive combination gave acceptable
results.
Experimental results indicated that polyether impression material showed higher shear bond
strength values to cold-cure acrylic than addition silicone impression material for both control and
perforated samples without adhesive application. The shear mean bond strength values of polyether
to the tray material after adhesive application were decreased. While, the shear mean bond strength
increased significantly when addition silicone was used with the adhesive and with the combination
samples.
ER -