@Article{, title={Design and Implementation of a Microcontroller Based DC/AC Inverter تصميم وتنفيذ عاكس تيار مستمر/ تيار متناوب باستخدام المسيطر الدقيق}, author={Firas Mohammed Ali Al-Raie فراس محمد علي الراعي and Hawraa Qasim Hameed حوراء قاسم حميد}, journal={AL-MANSOUR JOURNAL مجلة المنصور}, volume={}, number={24}, pages={19-40}, year={2015}, abstract={In this paper, a method is proposed to improve the frequency stability and accuracy of the generated wave in DC/AC square wave inverters using a microcontroller-based stabilized oscillator circuit. The proposed technique relies on using the 8051 microcontroller as a stable oscillator to generate two anti-phase 50 Hz square waves for the driving power stage of the inverter based on a program stored in its internal ROM. These signals are then boosted to increase their voltage and current levels using BJT switching mode power transistors operating in the push/pull mode. The resulting signal is then raised into the required voltage level with the aid of a step-up transformer. A practical inverter circuit has been designed and constructed to convert a 12 V battery DC input into 220 V AC output based on the 8051 microcontroller. This circuit consists of an 8051 microcontroller, buffer, driver power transistor stage, final power transistor stage, and a step-up transformer. The inverter circuit has been simulated, implemented, and tested practically. The test measurements have indicated that the circuit gives a full load power of 10 W with full-load voltage regulation of 8%, and a maximum conversion efficiency of 70%.

في هذا البحث تم اقتراح طريقة لتحسين الإستقرارية الترددية ودقة تردد الإشارة المتولدة لدوائر العاكس ذات الإشارة المربعة عن طريق استخدام دائرة مذبذب عالي الاستقرار مبنية باستخدام المسيطر الدقيق. تعتمد التقنية المقترحة على استخدام المسيطر الدقيق 8051 ليعمل كمذبذب عالي الاستقرار لتوليد إشارتين مربعتين متعاكستين بالطور بتردد 50 Hz وإرسالهما إلى مرحلة مشغل القدرة لدائرة العاكس عن طريق برنامج مخزون في ذاكرته الداخلية الدائمية. يتم بعد ذلك تضخيم هذه الإشارات لزيادة مستوى التيار والفولتية فيها عن طريق مضخم قدرة تحويلي يعمل بطريقة الدفع/السحب بترانزستورات قدرة من نوع BJT. ويتم رفع جهد الإشارة المتناوبة المتولدة الى القيمة المطلوبة بواسطة محول رافع للجهد. تم تصميم وتنفيذ دائرة عاكس عملية لتحويل جهد مستمر مقداره 12 V إلى جهد متناوب قيمته الفعالة 220 V باستخدام المسيطر الدقيق 8051. تتكون الدائرة المقترحة من المسيطر الدقيق 8051 وعازل ومضخم قدرة أولي ومرحلة تضخيم قدرة نهائية بالإضافة إلى محول رافع للجهد. تمت محاكاة دائرة العاكس بواسطة الحاسوب ومن ثم تنفيذها واختبارها عملياً. وقد بينت نتائج القياسات العملية بأن الدائرة تعطي قدرة خرج مقدارها 10 W للحمل الكامل بتنظيم جهد مقداره 8% وبكفاءة تحويل قصوى تصل إلى 70%} }