TY - JOUR ID - TI - THE EFFECT OF FLOW CONDITIONS AND GEOMETRIC PARAMETERS ON THE SCOUR VALUE DOWNSTREAM COMPOSITE STRUCTURES OF WEIR AND GATE تاثير ظروف الجريان والعوامل الهندسية على قيمة الانجراف مؤخر المنشات المركبة من الهدارات والبوابات AU - Hassan A. Omran حسن علي عمران AU - Saleh I. Khassaf صالح عيسى خصاف AU - Fadhel Abdulabbas Hassan فاضل عبد العباس حسن PY - 2016 VL - 7 IS - 1 SP - 115 EP - 128 JO - KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية SN - 20715528 25230018 AB - In this research, a study was conducted experimentally to investigate the scour hole dimensions downstream the combined structures which consist of weir and gate. Twelve models have been designed and every model is formed from composite weir consists of two geometric shapes and three types of gates which are rectangular, semi-circular and triangular in shape, where multi factors were studied to find out the effect of changing geometry for both weir and gate, discharge flowing in the flume and particle size of bed material on the dimensions of scour hole. The experiments was conducted in a laboratory channel was constructed from blocks and concrete with length of 18 m, 1 m width and 1 m depth. The laboratory models were installed after 7 m from the main gate which is controlling the passage of water from the main reservoir into the flume. At the beginning, the calibration process was conducted to identify the actual discharge values that pass in the flume, then experiments were conducted to calculate the discharge coefficient for each model, which represents one of the studied factors within the dimensional analysis of the variables to derive the empirical formulas to calculate the dimensions of scour hole. Then the experiments were conducted in order to derive formulas to investigate the depth and length of the scour hole which formed in the sand floor spreading as a layer of 30 cm in thickness for a distance 4 m downstream combined structure. Two samples of sand were used in the experiments with different median size of particles ( d50), the first of 0.7 mm and the second of 1 mm. Using the dimensional analysis by π theorem and IBM SPSS 21 program, Four nonlinear relationships were derived to calculate the dimensionless scour depth (SD / d50) and another four nonlinear relationships calculates the dimensionless length of scour (SL / d50) depending on the laboratory results for each of the relative discharge (Qr), Froude number in terms of mean size of particle of bed material (Frd), non-dimensional difference head between upstream and downstream of combined structure (HD / d50), dimensionless distance between the lower edge of the weir and the upper edge of the gate (y3 / d50), dimensionless head over the crest of compound weir (h/d50) and the discharge coefficient (Cd), where the resulted determination coefficients (R2) from these relationships were good.

تمت دراسة خصائص النحر مختبرياً في هذا البحث مؤخر المنشآت المركبة المتكونة من الهدارات و البوابات، إذ تضمنت الدراسة قياس اقصى عمق و اقصى طول لحفرة النحر المتكونة مؤخر تلك المنشآت. تم تصميم 12 نموذج حيث يتكون كل نموذج من هدار مركب من شكلين هندسيين و ثلاثة اشكال من البوابات و هي المستطيلة ، الدائرية و المثلثة، حيث تمت دراسة تأثير كل من تغير الابعاد الهندسية لشكل الهدار و البوابة، التصريف المار في القناة و حجم مادة القعر على ابعاد حفرة النحر.لقد تم اجراء التجارب في قناة مختبرية شُيِّدَت من البلوك و الخرسانة بطول 18 م و عرض 1 م و عمق 1 م ، حيث تم تثبيت النماذج المختبرية على بعد 7 م من البوابة الرئيسية التي تتحكم بمرور الماء من الحوض الرئيسي الى داخل القناة. في بداية العمل المختبري تم اجراء عملية المعايرة لمعرفة التصاريف الفعلية المارة خلال القناة و بعد ذلك تم تجارب باستخدام قيم مختلفة للتصريف داخل القناة بحيث يتغير على اساسها عمق الماء في مقدم و مؤخر المنشآت المركبة و ذلك لفحص الاداء الهيدروليكي و قياس معامل التصريف (CD) لكل نموذج الذي يعتبر احد العوامل المدروسة و التي تدخل ضمن التحليل البعدي للمتغيرات الخاصة باشتقاق معادلات حساب ابعاد حفرة النحر. بعد ذلك تم اجراء تجارب المختبرية لغرض اشتقاق المعادلات الخاصة بقياس عمق و طول حفرة النحر التي تتشكل في ارضية رملية تمتد بمسافة 4 م مؤخر المنشأ المركب و على عرض القناة و بسمك 30 سم، حيث تم استخدام نموذجين من الرمل لمادة القاع بمعدل قطر للنموذج الاول (D50) 0.7 ملم و للنموذج الثاني 1 ملم.باستخدام نظرية Π للتحليل البعدي و برنامج SPSS ، إشتُقّتْ اربع علاقات لا خطية خاصة بحساب عمق النحر اللابعدي (SD/D50) و اربع علاقات اخرى خاصة بحساب طول النحر اللابعدي (SL/D50)و علاقتهما مع كل من التصريف النسبي (QR) ، رقم فرويد بدلالة متوسط حجم حبيبات مادة القعر ((FRD ، فرق المنسوب اللابعدي بين مقدم و مؤخر المنشأ المركب (HD/D50) ، المسافة اللابعدية بين الحافة السفلى للهدار و الحافة العليا للبوابة (Y3/D50) و معامل التصريف (CD) حيث كانت قيم معاملات التحديد (R2) الناتجة من هذه العلاقات جيدة.   ER -