TY - JOUR ID - TI - Experimental Study of the Thermal Characteristics for a Thermosyphon Pipe with Finned Condenser دراسة تجريبية من الخصائص الحرارية لأنابيب الثرموسيفون مع مكثف مزعنف AU - Obaid T. Fadhil عبيد طلك فاضل AU - Mustafa B. Al Hadithi مصطفى برزان الحديثي AU - Harith M. Al Hiti حارث معجل الهيتي PY - 2016 VL - 19 IS - 2 SP - 301 EP - 309 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - The thermosyphon pipes are two-phase heat transfer devices with extremely high effective thermal conductivity. In this work, the thermal characteristics of a thermosyphon pipe with finned condenser (free convection condenser) is studied experimentally. The thermosyphon pipe is manufactured from copper. Distilled deionized water is used as a working fluid, the pipe is charged at filling ratio equal to 50% of the evaporator volume. Annular fins manufactured from aluminum are installed on the outer surface of the condenser section. The thermosyphon pipe is tested experimentally at different input power (2 W, 5 W, 10W, 15 W, 20 W, 25 W, and 40 W) and different inclination angle (30o, 60o, and 90o from horizontal). The results show that the increase in the input power leads to increase in the thermosyphon pipe operating temperature, while the thermal resistance decreases with increasing the input power. Also the results showed the thermal performance of the pipe is improved when the pipe is positioned at inclination angle of 30o comparing with the inclination angles 60o, and 90o.

ان أنبوب الثرموسيفون هو من أدوات نقل الحرارة ثنائية الطور ويعتبر ناقل حراري كفوء جداً.في هذا البحث تم دراسة الاداء الحراري لانبوب ثرموسيفون ذي مكثف مزعنف (مكثف يبرد بالحمل الحر) تجريبياً. تم تصنيع أنبوب الثرموسيفون من مادة النحاس .أستخدم الماء المقطر كمائع تشغيل، حيث تم شحن الانبوب بكمية تعادل 50% من حجم المبخر. وقد ثبتت زعانف حلقية مصنوعة من الالمنيوم على طول السطح الخارجي للمكثف. تم أختبار أنبوب الثرموسيفون تجريبياً عند قيم مختلفة للقدرة الداخلة ( 2 واط و 5 واط و 10 واط و 15 واط و 20 واط و 25 واط و 40 واط) و زوايا ميل مختلفة ( 30° و 60° و 90° من الوضع الافقي). أظهرت النتائج أن زيادة القدرة الداخلة تؤدي الى زيادة درجة حرارة اشتغال الانبوب، بينما تنخفض المقاومة الحرارية مع زيادة القدرة الداخلة. وهذا يعني تحسن الاداء الحراري للانبوب مع زيادة القدرة الداخلة. أيضاً بينت النتائج أن الاداء الحراري للانبوب يكون افضل عند وضع الانبوب بزاوية ميل 30° عن الافق مقارنة مع زوايا ميل 60° و 90. ER -