TY - JOUR ID - TI - Heat transfer investigation in a three dimensional annulus made of laminated composite Aluminum/hexadecane and filled with porous media دراسة انتقال الحرارة في محتوى حلقي ثلاثي الأبعاد مصنع من المادة المركبة Aluminum/hexadecane ومملوء بوسط مسامي AU - Manal H. AL - Hafidh PY - 2016 VL - IS - 38 SP - 109 EP - 131 JO - The islamic college university journal مجلة الكلية الاسلامية الجامعة SN - 19976208 26644355 AB - Heat transfer by natural convection of air flow has been studied numerically in a three dimensional inclined annulus. Two cases are taken for the annulus material which is made of laminated composite materials. Aluminum/Hexadecane phase change material (PCM) is taken in the first case and pure hexadecane material in the second case for the purpose of comparison. The annulus enclosure is filled with porous media between two inclined concentric cylinders under steady state condition and constant wall temperature boundary condition. The parameters affected on the system are modified Rayleigh number (10 ≤Ra*≤ 1000), radius ratio Rr (0.2, 0.3, 0.4 and 0.5) and the annulus inclination angle δ (0, 30, 45, 60 and 90). The results show a maximum heat transfer for horizontal Aluminum/Hexadecaneannulus which increases with the increase of Ra* and Rr. The maximum variance in heat transfer for the two materials is 65.4% for horizontal annulus with Rr=0.2 and Ra*=1000. A correlation of Nu in terms of Ra*, Rr and the annulus inclination angle δ has been developed for the two cases.

تمت الدراسة العددية لانتقال الطاقة الحرارية بالحمل الطبيعي لجريان الهواء في محتوى حراري مائل ثلاثي الأبعاد. دُرست حالتين لمادة المحتوى التي صنعت من مواد مركبة مصفحة. في الحالة الأولى استخدمت المادة المركبة المتغيرة الطور Aluminum/Hexadecane وفي الحالة الثانية مادة الهكسادكين النقية pure hexadecane لغرض المقارنة. المحتوى الحراري مملوء بمادة مسامية بين أسطوانتين متمركزتين مائلتين تحت ظروف حالة الاستقرار ودرجة حرارة ثابتة للجدار. العوامل الاستدلالية المؤثرة هي عدد رالي المعدل (10 ≤Ra*≤ 1000) ونسبة الأقطار Rr (0.2, 0.3, 0.4, 0.5) وزاوية ميلان المحتوى δ (0, 30, 45, 60 90). بينت النتائج أعلى انتقال في الطاقة الحرارية للمحتوى الأفقي المصنع من مادة Aluminum/Hexadecane والتي تزداد بزيادة Ra*و Rr. أعلى فرق في انتقال الطاقة الحرارية بين المادتين 65.4% في حالة استخدام المحتوى الأفقي لمادة Aluminum/Hexadecane لعدد رالي Ra*=1000 ولنسبة أقطار Rr=0.2. مثلت النتائج بمعادلات تجريبية تربط عدد نسلتبعدد رالي المعدّل ونسبة الأقطاروزاوية الميلان. ER -