@Article{, title={Studying the Physical Properties of Ceramic Bodies Prepared by Slip Casting Technique دراسة الخصائص الفيزيائية للاجسام السيراميكية المحضرة بتقنية الصب الانزلاقي}, author={Sabah A. Salman صباح انور سلمان and Sheahab A. Z. Al-jubouri شهاب احمد زيدان and Haydar Ali Salman Al-obaidy حيدر علي سلمان}, journal={Academic Science Journal مجلة العلوم الاكاديمية}, volume={10}, number={4}, pages={25-39}, year={2014}, abstract={In this work, physical phenomena related to the growth and phase formation of alumina, (Al2O3), powder are investigated by experiments and computer calculations. The specimens were formed by slip casting technique. These specimens were fired at various temperatures (500, 1100 and 1600) °C. Alumina samples with different dopant percentages were prepared to study their various physical properties. Before casting, slurries with (60 wt. %) solid content and different percentages of dopant additions were prepared. The dopant used here is kaolinite with (0, 5, 10 and 15) percentage addition, where kaolinite is one of many types of raw materials that have plasticity and advantage of securing. Sodium carboxymethylcellulose (Na-CMC) solution was used as dispersant. The stability of the slip clearly depends on the percentage of dispersant added and the best ratio is found to be (0.33 ml) for each gram of solids. Kaolinite percentage increase leads to decreasing the porosity, water absorption and mass losses. But it leads to increase thermal conductivity, density and shrinkage.

في هذه البحث، تم دراسة الظواهر الفيزيائية المتعلقة بانماء وتحول الاطوار البلورية لمسحوق الالومينا (Al2O3) من خلال التجارب والحسابات. تم تشكيل العينات باستخدام طريقة الصب الانزلاقي. واحرقت هذه العينات بدرجات حرارة مختلفة Cº (500, 1100 و1600). حضرت عينات الالومينا بنسب تشويب مختلفة لدراسة خصائصها الميكانيكية والفيزيائية المتعددة. قبل عملية الصب، تم تحضير عوالق بتراكيز بنسبة وزنية محددة (60%), وبنسب تشويب متعددة (0, 5, 10 و15)%، اذ ان المشوب المستخدم هو مسحوق الكاؤولينايت، وهو احد المواد الخام التي تمتلك صفة اللدونة وميزة الربط. ان المادة المشتتة التي تم استخدامها هي محلول (Na-CMC). اذ ان استقرارية العالق تعتمد بشكل مباشر على نسبة اضافة المشتت، وافضل نسبة اضافة كانت (0.33 ml) لكل غرام واحد من المادة الصلبة. زيادة نسب اضافة الكاؤولينات يؤدي الى نقصان في المسامية، امتصاصية الماء والفقدان بالكتلة. بينما يؤدي الى زيادة التوصيلية الحرارية، الكثافة، التقلص.} }