TY - JOUR ID - TI - The Effect of In-Situ Method Parameters in Size and Distribution of Particles for Aluminum Matrix Composites تأثير عوامل طريقة ال in-situ على حجم وتوزيع الحبيبات في المواد المتراكبة ذات اساس من الألمنيوم AU - Ahmed Flayyih Hussein PY - 2016 VL - 34 IS - 2 Part (A) Engineering SP - 346 EP - 355 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this work, an in-situ (oxidation) method was used extensively to reinforce aluminum matrix composites with alumina particles. Multi parameters such as alumina particle size and its distribution were studied in details. Side hole diameter, stirring velocity and stirring method were studied also. XRD and SEM tests were used to characterize alumina particles. Results revealed it was obtained on aluminum matrix composites reinforced with alumina particles in Nano size via control side hole diameter and stirring velocity, where the side hole diameter is very effective factor on alumina particle size. The particle size decreases from several microns at (900µm) side hole DIA. to Nano size (≥100nm) at side hole DIA. 500µm with manual stirring. Increasing stirring velocity has led to decrease in alumina particle size which givesthe ability to obtain alumina particles ≤50nm at stirring velocity 2280 RPM with side hole DIA. 900µm. The decreasing in the side hole diameter and increasing in stirring velocity lead to decrease in alumina particles size from several microns toward Nano size, but it has a negative influence on alumina particles distribution.

في ھذا البحث , المواد المركبة ذات اساس من الألمنيوم قويت بحبيبات من الألومينا باستخدامالأكسدة ) . تأثير كلا " من قطر الثقب الجانبي , سرعة وطريقة الخلط على حجم ) in-situ طريقةحبيبات الألومينا وتوزيعھا ضمن المعدن الأساس قد درست بشيء من التفصيل . اختبارات حيود الأشعة السينيةوالمجھر الإلكتروني الماسح قد استخدمت لتشخيص حبيبات الألومينا . من خلال النتائج تبين انه من خلال السيطرةعلى قطر الثقب الجانبي وسرعة الخلط اصبح من الممكن الحصول على مواد مركبة ذات اساس من الألمنيوم مقواةبحبيبات بحجم النانو متر. كذلك تبين ان لقطر الثقب الجانبي تأثير فعال على حجم حبيبات الألومينا حيث تناقص(nm الى حجم النانو ((≥ 100 (μm حجم حبيبات الألومينا من عدة مايكرو مترات عند قطر الثقب الجانبي( 900باستخدام الخلط اليدوي. الزيادة بسرعة الخلط ادت الى النقصان بحجم حبيبات (μm عند قطر الثقب الجانبي ( 500باستخدام سرعة خلط 2280 nm الألومينا حيث اصبح من الممكن الحصول على حبيبات الألومينا بحجم ≤ 50كذلك اظھرت النتائج, مثلما لزيادة سرعة الخلط ونقصان قطر الثقب .μm دورة/ الدقيقة وقطر الثقب الجانبي 900الجانبي تأثير ايجابي بنقصان حجم حبيبات الألومينا من عدة مايكرو مترات الى حجم النانو كذلك لھا تأثير سلبيعلى توزيع حبيبات الألومينا ضمن المعدن الأساس. ER -