TY - JOUR ID - TI - Studying the Properties of CoCrMo Alloys (F75) Doped Ge Using (Powder Metalluregy) Technique AU - Ammar H. Khilfa AU - Jamal Al-Deen AU - Haydar H.J. AU - Ali Hobi Haleem PY - 2016 VL - 24 IS - 3 SP - 723 EP - 732 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Cobalt chromium alloys are one of the best alloys used for biomedical applications due to their good wear resistance, high mechanical properties, acceptable bio-compatibility and high corrosion resistance. This study aims to investigate the effect of germanium additions(0.5, 1 and 1.5 wt%) on properties of CoCrMo (F75) alloy prepared using powder metallurgy technique. The corrosion, wear and compressive behavior were investigated using different examination and test including mechanical test (hardness, compression and wear) and electrochemical test (open circuit and potentiodynamic polarization). The results revealed that the addition of Ge has a notable effect on the porosity of sintered CoCrMo causing decreasing in porosity. The hardness increases when increases Ge addition. Also the addition of Ge increases the compression strength, and it's increased as additives increase. On the other hand the wear rate of CoCrMo (with and without additives) increases as the time and load increase, however wear resistance increases with the addition of Ge element and it's increased as Ge additives increase. The corrosion resistance of CoCrMo alloy improved after the addition of Ge in artificial saliva and Hank's solution. Also the corrosion resistance increase as Ge additives increase. The corrosion current for most used alloys in artificial saliva is lower than that for Hank's solution.

سبائك كوبالت كروم هي واحدة من افضل السبائك المستخدمة في التطبيقات الطبية وذلك لمقاومتها الجيدة للبلى وخواصها الميكانيكية العالية وتوافقية حياتية مقبولة ومقاومة تاكل عالية.هذا البحث يهدف الى التحقيق ودراسة تاثير اضافة الجرمانيوم بنسبة %(0.5,1,1.5)على خصائص سبيكة كوبلت كروم مولبدنوم المحضرة باستخدام تقنية الباودر ميتالورجي . مقاومة التاكل والبلى ومقاومة الانضغاط درست باستخدام عدة اختبارات وفحوصات مختلفة تتضمن الاختبارات الميكانيكية (الصلادة والانضغاط والبلى) والاختبارات الكهروكيميائية (جهد الدائرة المفتوحة والاستقطاب) النتائج وضحت ان لاضافة الجرمانيوم تاثير ملحوظ على المسامية للعينات الملبدة مسببة نقصانا في المسامية وبالتالي فان الصلادة تزداد بزيادة نسبة الجرمانيوم وكذلك تزداد مقاومة الانضغاط .من ناحية اخرى فان معدل البلى (مع او من دون اضافة) يزداد بزيادة الوقت والحمل المسلط عليها لذا فان مقاومة البلى تزداد بزيادة نسبة الجرمانيوم المضافة . مقاومة التاكل للسبيكة تتحسن بعد اضافة الجرمانيوم في محلولي اللعاب الصناعي وهانك وان تيار التاكل لاغلب السبائك المستخدمة في محلول اللعاب الصناعي يكون اقل منه في محلول هانك. ER -