@Article{, title={Study the Effect of Mica as Filler in Natural Rubber properties}, author={Abeer Adnan Abd}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={24}, number={3}, pages={773-781}, year={2016}, abstract={In the current, Studying the effect of mica upon the characteristics of curing system of natural rubber (NR) rubber has been carried out by using oscillating disk rehometer according to the ASTM D-2084 specification. Results indicate that the addition of cheap material (Mica) to natural rubber in proportions of (4, 8, 12, 16, and 20) % of mica enhanced the hardness, the tensile strength and reometric properties of the rubber. The mix of NR/mica (100: 20) shows promising mechanical properties than other composition. The result showed that the curing time, scorch time and minimum torque decreased with filler content increase therefore the processing time decreased. Also the tensile strength, maximum torque, specific density and hardness advanced with the filler content increase. The hardness developed significantly from (40) to (46) shore (A) when mica content was increased therefore the modulus increased and the elongation decreased. The maximum tensile strength and the minimum wear rate at (10) % of mica.

في البحث الحالي تم دراسة تاثيرالمايكا على خواص الانضاج لمطاط NR ) ) وذلك باستخدام reometric oscillating disk وطبقا للمواصفة العالمية ASTM D2084 اظهرت النتائج ان اظافة الماكا الرخيصة الثمن لمطاط NR ) ) وبنسب ( 20,16,12,8,4)% حسنت الصلادة و مقاومة الشد و خواص الانسياب للمطاط. ان خلط المايكا مع المطاط بنسبة (20/100) قد اظهر الخواص الميكانكية المرغوب بها اكثر من باقي النسب . النتائج اظهرت ان زمن الانضاج والاصلاد العزم الاصغر يقل مع زيادة محتوى المالى لذلك زمن التصنيع يقل .بالاضافة الى ذلك ان مقاومة الشد والعزم الاكبر والكثافة النوعية تزداد مع زيادة محتوى المادة المالئة و الصلادة تطورت بشكل ملحوظ من (40-46shore A(عندما تضاف المايكا لذلك معامل المرونة يزداد والاستطالة تقل.اكبر مقاومة شد واقل معدل بلى يحدث عند اضافة (10)% من المايكا.} }