@Article{, title={Effect of Steel Fibers, Polypropylene Fibers and/ or Nanosilica on Mechanical Properties of Self-Consolidating Concrete تأثير الالياف الفولاذية والياف البولي بروبلين مع او بدون الحبيبات النانوية السليكية على الخواص الميكانيكية للخرسانة الذاتية الرص}, author={Iqbal N. Gorgis and Maan S. Hassan and Rana T. Abdulkareem}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={34}, number={3 Part (A) Engineering}, pages={527-538}, year={2016}, abstract={This research concerned studying the combined effect of using nano-silica and/ or hybrid fibers on key mechanical properties of self-consolidating concrete SCC. A comprehensive experimental work has been carried out, using steel fiber (SF) with volume fraction (0, 0.5% and 1.5%), polypropylene fiber (PPF) (0%, 0.05% and 0.15%) and SiO2 nanoparticles (0%, 2% and 4%) by weight of powdered material (silica fume- Sf ) with constant w/c ratio (0.48) to produce eleven different mixtures and tested at different ages (7, 28 and 90 days). Results showed that adding fibers adversely affect SCC workability and thus more dosage of super plasticizer (SP) should be added to stay within the standard limits. comparable to conventional concretes, the presence of steel fibers with SCC provide slight increase in compressive strength at 28 days, (up to 11%), while significant enhancement in tensile properties were observed (up to 24% and 32% for splitting and flexural strength respectively). Polypropylene or hybrid fibers however, provide lower enhancement compared with steel fibers. In contrast, implementation of nanosilica leads to significant improvement in concrete strengths particularly at 4% dosage. Combined effect of 4% nanosilica and 1.5% of steel fibers provide the superior hardening effect on the flexural performance compared with softening effect provided by other added dosages. Scanning Electron Micrograph (SEM) images confirm the matrix densification effect due to nanosilica adding. Flexural strength of SCCs without nanosilica was generally higher than splitting testing results. This fact does not change even with the presence of nanosilica and/ or fibers.

تم دراسة التاثير المشترك لاستخدام الحبيبات النانوية السليكية مع او بدون الالياف المهجنة على الخواص الميكانيكية للخرسانة ذاتيـــــة الرص. من اجل دراسة هذا التأثير تـــــم القيام بفحوصات مختبرية باستخدام الالياف الفولاذيــــة بنسبـة ( 0 % و 0.5% و1.5% ) والالياف البولي بروبلين بنسبة ( 0% و0.05 % و 0.15.% ) وحببيبات النانو سليكا بنسبة (0% و2% و 4.% ) 2%) كنسبة من وزن المواد الناعمة مع نسبة ثابتة من الماء الى السمنت (0.48) لانتاج احد عشر خلطة مختلفة ومفحوصة بمختلف الاعمار7 و 28 و 90 يوم. النتائج اشارت الى حصول تأثير عكسي عند اضافة الالياف على القابلية التشغيلية الخرسانية لذا تطلب اضافة نسبة اكثر من المضاف الكيميائي الملدن المتفوق للثبات ضمن حدود المواصفات. ان اضافة الالياف الفولاذية الى الخلطة الخرسانة ذاتية الرص ادى الى زيادة قليلة في مقاومة الانضغاط عند عمر28 يوم بمقدار11% بينما زيادة كبيرة في خواص الشد الى حوالي 24%) و(32% لمقاومتي الانشطار والانثناء بالتتابع. اما الالياف البولي بروبلين او الخليط من الالياف يعطي تحسن اقل مما في حالة الالياف الفولاذية. بالمقارنة مع الالياف فان حبيبات SiO2النانوسليكا تؤدي الى تحسن كبير في مقاومة الخرسانة خصوصا عند نسبة اضافة 4%. التأثير المشترك للحبيبات النانوية بنسبة 4% مع الالياف الفولاذية بنسبة 1.5% يعطي تاثير افضل على الخواص الصلبة. بالنسبة لفحص البنية المجهرية فيتوافق مع التأثير المكثف للتراكيب الداخلية للعجينة السمنتية نتيجة استخدام الحبيبات النانوية. كما لوحظ ان مقاومة الانثناء للخرسانة الذاتية الرص بدون المواد النانوية كانت اعلى من نتائج فحص مقاومة الانشطار. لذا هذه الحقيقة لا تتغيربوجود المواد النانوية مع او بدون الالياف.} }