TY - JOUR ID - TI - Comparative Study of Influence Post weld Aging on the Mechanical Properties of Similar Friction Stir Welded Joints for Al 2024-T3 and Al 7075-T73 دراسة مقارنة لتاثير التعتيق اللاحق على الخواص الميكانيكية لوصلات اللحام المتشابهة بالخلط الاحتكاكي من سبائك الالمنيوم T3-2024 وT73- 7075 AU - Ruqaya Abdulkadhim Abbas AU - Munthir M. radhy AU - Muna K. Abbass PY - 2016 VL - 34 IS - 3 Part (A) Engineering SP - 588 EP - 599 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The aim of present study is to investigate the effect of precipitation hardening heat treatment at different aging conditions on the mechanical properties and microstructure of similar friction stir welding (FSW) joints ofAA 2024-T3 and AA 7075-T73 aluminum alloys. Friction stir welding was carried out using milling machine with best welding parameters (tool rotation speed 898 rpm, welding speed 45 mm ̸ min and threaded cylindrical pin geometry). Tensile test, microhardness test,microstructure examination,and X-ray radiographic inspection of FSW joints were made.The results indicated that the best aging conditions for similar welded joints of Al2024 and Al 7075 were in sample (natural aging for two week) and sample(artificial ageing at 120°C for 24 h) respectively. ‏Microhardness in the as-welded samples showed fluctuations across the weld zone and minimum hardnessoccurs in the heat affected zone(HAZ) in both alloys while the hardness after heat treatment at best aging conditions was improved across the whole weldment and increased in stir zone,

يهدف هذا البحث الى التحقق من تاثير المعاملة الحرارية التصليد بالترسيب عند ظروف تعتيق مختلفة على الخواص الميكانيكية والبنية المجهرية لوصلات اللحام المتشابهة بالخلط الاحتكاكي من سبائك المنيوم 2024 و 7075. تم اجراء اللحام عند افضل ظروف لحام من سرعة دوران 898 دورة دقيقة , وسرعة لحام 45 ملم دقيقه مع تصميم الاداه اسطواني مسنن. تم اجراء اختبار الشد والصلادة وفحص البنية المجهرية والفحص بحيود الاشعة السينية على الملحومات. وبينت النتائج على ان افضل ظروف تعتيق للملحومات المتشابهة لسبائك الالمنيوم 2024 و 7075 كانت عند النموذج بعد( التعتيق الطبيعي لمدة اسبوعين ) والنموذج بعد ( التعتيق الاصطناعي عند 120 لمدة 24 ساعة) على التعاقب . واظهر اختبار الصلادة للملحومات تقلب في قيم الصلادة عبر منطقة اللحام وكانت اقل صلادة عند المنطقة المتاثرة بالحرارة لكلا السبيكتين بينما اظهرت الصلادة بعد المعاملة الحرارية عند افضل ظروف تعتيق تحسين عبر الملحومة وازدادت عند منطقة اللحام ER -