TY - JOUR ID - TI - Optimization Corrosion Protection Parameters of steel pipeline By Using Taguchi Experimental Design أمثلية عوامل الحماية من التآكل للأنابيب الفولاذية باستخدام التصميم التجريبي لتاكوشي AU - Ruaa Abd Al Kaream Salman AU - Muhammed A.Mahdi AU - Naser Korde Zedin PY - 2016 VL - 34 IS - 4 Part (A) Engineering SP - 754 EP - 761 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Cathodic Protection System (CPS) is used to reduce corrosion by minimizing the difference in potential between anode and cathode. Two types of Cathodic protection systems are usually applied: The galvanic protection systems use the sacrificial anodes, the other system is impressed current (that used in this paper), and this can be achieved by applying a current to the structure to be protected from electrical source. The main objective of this work is to determine experiments designed according to Taguchi method and Analysis the results by MINITAB program. Experiments have been conducted by using L9 orthogonal array with three parameters (concentrations of NaCl solution, Temperate and Speed of Solution) at three levels (low, medium and high). The result of research based on the signal to noise ratio (S/N) depending on the condition smaller is better approach. The results of this paper show that the significant factor is NaCl wt% and the optimum combination of parameters which were reducing the corrosion are temperature (35 °C), the speed of solution (15 r.p.m) and the NaCl concentration (20 %wt).

يستخدم نظام الحماية الكاثودية لتقليل التأكل بواسطة تخفيض الاختلاف في الجهد بين الانود والكاثود. وعادتاً يتم تطبيق نوعين من انظمة الحماية الكاثودية وهما: نظام الحماية الكلفاني وفية يتم استخدام اقطاب مضحية والنظام الاخر هو التيار المسلط (والذي تم استخدامه بهذا البحث)وهذا يمكن ان يتم بواسطة تسليط تيار على التركيب المراد حمايته من مصادر للتيار الكهربائي .يهدف البحث لتصميم التجارب بالاعتماد على طريقة تاكوجي ويتم تحديد الامثلية اعتماداً على برنامج ( MINITAB program ).في التجارب العملية تم استخدام مصفوفه رياضية L9 والتي تكون بثلاث عوامل اساسية (نسبة NaCl ودرجة الحرارة وسرعة حركة المحلول) وهذا يتم عند ثلاث مستويات (منخفض ومتوسط وعالي ). نتائج البحث اعتمدت على نسبة الاشارة الى الضجيج (S/N) اعتماداً على الحالة الاصغر هي الافضل. تبين نتائج البحث ان العامل الاكثر تأثيراً في التأكل هو نسبة NaCl والظروف الامثل لتقليل التأكل هي عند درجة حرارة (35 °C) وسرعة المحلول (15 r.p.m) ونسبة NaCl (20 %wt). ER -