@Article{, title={Effect of indium content on X- ray diffraction and optical constants of InxSe1-xthin films تأثير حيود الانديوم على حيود الاشعة السينية و الثوابت البصرية لاغشية InxSe1-x الرقيقة}, author={Bushra A.Hasan بشرى عباس حسن and Iyat M.Abdulrazzaq ايات منير عبد الرزاق}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={14}, number={29}, pages={55-72}, year={2016}, abstract={Alloys of InxSe1-xwere prepared by quenching technique with differentIn content (x=10,20,30,and 40).Thin films of these alloys were prepared using thermal evaporation technique under vacuum of 10-5 mbar on glass, at room temperature R.T with different thicknesses (t=300, 500 and 700 nm). The X–ray diffraction measurement for bulk InxSe1-x showed that all alloys have polycrystalline structures and the peaks for x=10 identical with Se, while for x=20,30 and 40 were identical with the Se and InSe standard peaks.The diffraction patterns of InxSe1-xthin film show that with low In content (x=10, and 20) samples have semi crystalline structure, The increase of indium content to x=30 decreases degree of crystallinity and further increase of indium content to x=40 leads to convert structure to amorphous. Increase of thickness from 300 to 700nm increases degree of crystallinity for all indium content. Transmittance measurements were used to calculate refractive index n and the extinction coefficient k using Swanepole’s method. The optical constants such as refractive index (n), extinction coefficient (k) and dielectric constant (εr, εi) increases for low indium content samples and decreases for high indium content samples, while increase of thickness increases optical constants for all x values.The oscillator energyE0, dispersion energy Ed, and other parameters have been determined by Wemple - DiDomenico single oscillator approach.

تم تحضير سبائك من InxSe1-x وبمحتوى مختلف من الانديوم (x=10,20,30,and 40) باستخدام طريقة الانجماد السرع للمنصهر. حضرت اغشية رقيقةمن هذه السبائك باستخدام طريقة التبخير الحراري تحت الفراغ 10-5mbarعلى قواعد زجاجيةعند درجة حرارة الغرفة باسماك مختلفة t=300,500, 700)) نانومينر.اظهر فحص الاشعة السينيةان سبائك InxSe1-x كانت متعددة البلورات وان القمة عندx=10 كانت متطابقة مع قمم Seالقياسية بينما كانت متطابقة مع قمم SeوInSeالقياسية لقيمx=20,30 و40 . اظهر طيف الاشعة السينية لاغشيةInxSe1-x الرقيقة ان النماذج ذات المحتوى الواطيء من الانديوم20وx=10 كانت ذات تركيب شبه بلوري .زيادة المحتوى من الانديوم الى x=30 يقلل درجة التبلور وان الزيادة اكثر الى x=40 يؤدي الى تحويل التركيب الى عشوائي. زيادة السمك من 300 الى700 نانوميتر يزيد من درجة التبلورلكل قيم المحتوى من الانديوم. تم حساب الثوابت البصرية وهي معامل الانكسار, معامل الخمود, من قياس طيف النفاذ باستخدام طريقة Swanepole.الثوابت البصرية معامل الانكسار, معامل الخمود, ثابت العزل الحقيقي والخيالي ازدادت للعينات ذات المحتوى الواطئ من الانديوم وقلت للعينات ذات المحتوى العالي من الانديوم, بينما ازدادت الثوابت البصرية مع زيادة السمك لكل قيم المحتوى من الانديوم.تم حساب طاقة التذبذب والتشتيت ومعاملات اخرى من تقريب Wemple - DiDomenico للمتذبذب المنفرد.} }