@Article{, title={Low Cycle Fatigue of Precipitation Hardened Aluminum Alloy كلال الدورات المنخفضة في سبيكة المنيوم قابلة للتصليد بالترسيب}, author={Dhafir S. Al-Fattal and Saif Khalid Mahmood}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={9 Part (A) Engineering}, pages={2146-2158}, year={2015}, abstract={In this work, the influence of different heat treatments on the mechanical properties and fatigue life under low cycles of wrought 7075 aluminum alloy was experimentally investigated. The heat treatments included peak ageing (T6), over ageing (T73) and annealing (O).The flat fatigue specimens were subjected to constant reverse bending load. The tests were performed at the laboratory environment with a frequency of 23.6 Hz andat a stress ratio (R) of -1.For each temper, strain-life graphs were obtained for specimens with notches in the form of central cylindrical holes made by drilling. The fatigue resistance of specimens with notches was comparedto the results for notch-free specimens. It was observed that the presence of a stress raiser, such as a drilled hole, lowers the fatigue life for all tempers. However, the notch sensitivity of the fatigue life was different for each temper. The fatigue crack growth rate of T73 and annealed temper was investigated; the results showed that T73 treated sample exhibits higher crack growth resistance. Paris` equation was derived for each temper.

في هذا البحث، تم التحقق عمليا من تاثير معاملات حرارية مختلفة على الخواص الميكانيكية وعلى عمر الكلال تحت دورات منخفضة لسبيكة الالمنيوم 7075 . تضمنت المعاملات الحرارية : التعتيق لاقصى صلادة (T6) والتعتيق المفرط (Overageing,T73) والتخمير(O). تعرضت عينة الكلال المسطحة الى حمل انحناء متعاكس ثابت السعة. تم اجراء الاختبار في جو المختبر مع تردد 23.6 Hz و نسبة اجهاد -1 .لكل معاملة حرارية ، تم ايجاد منحنيات الانفعال- العمر لعينات ذات حزوز بشكل ثقوب اسطوانية مركزية صنعت بعملية التثقيب . تم مقارنة مقاومة الكلال للعينات المحززة مع نتائج مقاومة الكلال لعينات غير محززة . لوحظ ان وجود رافعات الاجهاد، كما الحال في الثقوب، تخفض عمر الكلال لكل المعاملات، ولكن كان تأثير حساسية الحز علىعمر الكلال مختلف لكل معاملة. تم التحقق من معدل نمو الشق لمعاملة التخمير و معاملة T73 و اظهرت النتائج ان معاملة T73 لها مقاومة اعلى لنموالشق . تم ايجاد معادلة باريس لكل معاملة.} }