TY - JOUR ID - TI - Effect of Sodium Chloride on Microstructure and Mechanical Properties of Al-Si alloy تأثير كلوريد الصوديوم على البنية المجهرية والخواص الميكانيكية لسبيكة Al-Si AU - Jafer T. Al-Haidary AU - Mahdie Mutier Hanon AU - Yasir Muhi Abdulsahib PY - 2015 VL - 33 IS - 9 Part (A) Engineering SP - 2187 EP - 2197 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this work, the effect of sodium chloride (NaCl) powder addition with different amounts on microstructure and mechanical properties of Al-12 wt. %Si alloy was investigated. In this technique, modification by NaCl was used because of its availability and low price comparing to other modifiers such as Sr and Sb. A 1000 °C as pouring temperature of molten alloy was used. The present results showed that there is a significant change in the mechanical properties and microstructure compared with unmodified alloy. The optimum properties were found by adding 0.5wt% NaCl to the alloy, and also the modification of microstructure alloy. Mechanical properties and microstructure of Al-12wt. %Si alloys that poured from 1000 °C with NaCl additives were compared with the corresponding alloys but at 800 °C pouring temperature, it is found that alloys poured from 1000 °C have best properties as compared with the same alloys poured from 800 °C.

في هذا البحث تم دراسة تأثير إضافة كميات مختلفة من مسحوق كلوريد الصوديوم (NaCl) على البنية المجهرية والخواص الميكانيكية لسبيكة Al-12wt.%Si. في هذه الطريقة تم اجراء عملية التحوير بواسطة كلوريد الصوديوم وذلك لوفرته ولرخص ثمنه بالمقارنة مع المحورات الاخرى مثل السترونشيوم و الانتيمون. استخدمت درجة حرارة 1000 درجة مئوية لعملية الصهر وصب المنصهر من هذه الدرجة وذلك بسبب حدوث ذوبان المادة المضافة الى المنصهر والتي يعتقد ان الكلور سوف يتطاير كغاز تاركاً الصوديوم في السبيكة المذابة ليؤدي عمله. اظهرت النتائج المستحصلة بان هنالك تغييراً في الخواص الميكانيكية والبنية المجهرية بالمقارنة مع السبيكة غيرالمحورة. تم تحديد الاضافة التي تعطي خواص اعلى والتي كانت عند اضافة نسبة 0.5% من كلوريد الصوديوم الى السبيكة وكذلك تحوير البنية المجهرية. تم مقارنة الخواص الميكانيكية والبنية المجهرية لسبائك Al-12wt.%Si المصوبة من درجة حرارة 1000 درجة مئوية والمضافة اليها كلوريد الصوديوم بنفس السبيكة ولكن بدرجة حرارة صب مقدارها800 درجة مئوية, حيث وجد ان صب السبائك من درجة حرارة 1000 درجة مئوية تعطي خواص افضل من صب السبائك نفسها من درجة حرارة 800 درجة مئوية. ER -