TY - JOUR ID - TI - Improved of the Nanolaminate - Ceramic by the Additional of Aluminium to used in Higher Resistance Hydraulic Structures AU - Jawad Kadhim Abbood AU - Jabbar Abbas Jaber AU - Wisam Abidalabbas Abidalla AU - Mohammed Ali Nasser PY - 2016 VL - 24 IS - 4 SP - 855 EP - 867 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - It has been tried in this research to introduce this type of new structural materials as reproducible industrial materials and overtake some production obstacles by exploring the direction of chemistry structure relation. The compacted samples have been prepared from elemental powders (Titanium, Aluminum and Black Carbon) using the powder technology techniques. They have been dispersed in different concentrations (Ti-Al-C) and different molar ratios due to the change in the Ti to Al concentrations. Thus the effect of Al concentration on MAX phase evolution in the Ti-Al-C system has been investigated and discussed. Therefore, the concentration of Al has improved the applications of water resource structures, and that alloy, especially in corrosion resistance and under water, has proved structures as well as pipes because the Al has created the layer that protects this ceramic from hard and nature conditions , So the Al metal lead to use this ceramic in loading bearing structures such as bridges and high impact resistance such as Dams. The effects of cold and hot pressing as well as sintering in different temperatures are investigated. Phase evolution is discovered by X-ray diffraction (XRD), and SEM. Micro hardness test and Archimedes method is used to measure the density and porosity percentage. No evidence for the direct formation of MAX phases from elemental powders is foud which may explain the need of high temperatures to produce such phases since the breaking of bonds is required for the intermediate phase.

جرت محاولة في هذا البحث لتقديم منتج إنشائي جديد كنوع من المواد الصناعية الثانوية مثل السيراميك والتي تقاوم تأثير المياه وتتجاوز بعض المنتجات المعقدة وذلك بواسطة (اتجاه الربط) بالتركيب الكيمياوي . النماذج المكبوسة تحضر من مساحيق العناصر ( التيتانيوم , الألمنيوم, الكاربون الأسود ) والتي تم تشكيلها بتراكيز مختلفة ومختارة باستخدام تقنية استخدام تكنولوجيا المساحيق وبنسب مولارية اعتمادا على تغيير نسبة تراكيز عنصر التيتانيوم إلى عنصر الالمنيوم لذلك فان تأثير تركيز الالمنيوم على تطوير الطور الأحادي لخلط العناصر قد تم التحري عنها ومناقشتها . تبين إن تراكيز الالمنيوم قد حسنت من استخدام المنتج في المشاريع الكبيرة والمهمة كالمنشات الخاصة بالموارد المائية, خصوصا في مجال مقاومة التآكل والمنشات المانعة للتسرب تحت الماء للمنتج بسبب تكوين الالمنيوم طبقات حماية تقاوم الظروف الطبيعية والصعبة, وعليه يمكن استخدامه في المنشات ذات التحمل العالي مثل الجسور والمنشات التي تحت تأثير الصدمات والتحمل العاليين مثل السدود. تأثير الضغط البارد والحار والتلبيد بدرجات حرارة مختلفة تم التحري عنها. تم استكشاف سلوك الأطوار الأحادية بواسطة أشعة اكس وإجراء فحص المخطط المجهري الالكتروني, فحص قوة الصلادة المجهري وكذلك فحص طريقة ( ارخميدس ) لقياس نسب الكثافة والمسامية . تبين انه ليس من السهولة الحصول على الطور الأحادي مباشرة من خلال العناصر التي تحتاج إلى درجات حرارة عالية لإنتاج الطور الأحادي بعد كسر الأواصر بين الأطوار الوسطية . ER -