TY - JOUR ID - TI - Fabrication of Carbon Nanotube Reinforced Al2O3/Cr2O3 Nanocomposites by Coprecipitation Process تصنيع متراكبات نانوية من Al2O3/Cr2O3 مدعمة بأنابيب الكاربون النانوية بأستخدام عملية الترسيب AU - Hussein Alaa Jaber حسين علاء جابر PY - 2016 VL - 12 IS - 4 SP - 93 EP - 101 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - In this research, the effect of multi-walled carbon nanotubes (MWCNTs) on the alumina/chromia (Al2O3/Cr2O3) nanocomposites has been investigated. Al2O3/Cr2O3-MWCNTs nanocomposites with variable contents of Cr2O3 and MWCNTs were fabricated using coprecipitation process and followed by spark plasma sintering. XRD analysis revealed a good crystallinity of sintered nanocomposites samples and there was only one phase presence of Al2O3-Cr2O3 solid solution. Density, Vickers microhardness, fracture toughness and fracture strength have been measured in the sintered samples. The results show that the relative density, microhardness and fracture strength of nanocomposites are significantly improved at low contents of Cr2O3 and MWCNTs. The increase of MWCNT’s content in the nanocomposites has adversely affected due to increasing the tangle and interaction of MWCNTs with each other, which leads to agglomeration in the nanocomposites. Increasing of Cr2O3 content in nanocomposites increases formation of Al2O3-Cr2O3 solid solution that actually requires the high sintering temperature to achieve good densification. The fracture toughness of Al2O3/Cr2O3-MWCNTs nanocomposites was enhanced by increasing the carbon nanotube content.

يتضمن هذا البحث دراسة تاثير اضافة انابيب الكاربون النانوية (MWCNTs) الى متراكبات نانوية من الومينا/كروميا (Al2O3/Cr2O3). حيث تم تصنيع متراكبات نانوية من الالومينا/كروميا-انابيب الكاربون النانوية مع محتويات مختلفة من Cr2O3 و MWCNTs باستخدام عملية الترسيب وتليها عملية التلبيد بالبلازما. كشف تحليل حيود الاشعة السينية ببلورية جيدة لعينات المتراكب النانوي مع تكون طور واحد للمحلول الجامد من Al2O3/Cr2O3. تم قياس الكثافة, صلادة فيكرز المجهرية, متانة الكسر ومقاومة الكسر للعينات الملبدة. اظهرت النتائج ان الكثافة النظرية, الصلادة المجهرية ومقاومة الكسر تحسنت بشكل ملحوظ عند محتويات منخفضة من Cr2O3 و MWCNTs. زيادة محتوى MWCNTs في المتراكب النانوي له تاثير سلبي ويرجع السبب الى زيادة التشابك والتفاعل لانابيب الكاربون النانوية مع بعضها, الامر الذي ادى الى التكتل في المتراكب النانوي. في حين ان زيادة محتوى Cr2O3 في المتراكب النانوي ادي الى زيادة تكون طور المحلول الجامد الذي احتاج الى درجات تلبيد عالية لتحقيق التكثيف الجيد. تحسنت متانة الكسر للمتراكبات النانوية مع زيادة محتوى انابيب الكاربون النانوية. ER -