@Article{, title={Effect of Length of Symmetrical Cantilever Edges on The Absolute Maximum Bending Moment in Uniformly Loaded Simply Supported Reinforced Concrete Beams}, author={Talib Abdul Jabbar AL-Eyssawi}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={25}, number={1}, pages={129-144}, year={2017}, abstract={This paper is devoted to study the effect of length of symmetrical overhanging edges on the absolute maximum bending moment of uniformly loaded simply supported reinforced concrete beams. Successful implementation demonstrates the abilities and performance of STAAD Pro V8i which is the most popular structural engineering software products for 3D model generation, analysis and multi-material design. All calculations had been carried out done based on elastic analysis and the ultimate strength method of design as per ACI 318M-14 code requirements for flexural and deflection constraints.It is approved that the beam with optimallength of overhanging edge ( ) equal to 0.35 the beam length between supports ( ) has equal maximum positive bending moment and maximum negative bending moment and optimal absolute maximum bending moment compared with the same beam but with other lengths of overhanging edges. Different beams cases had shown that the area of tension reinforcement may be increased up to 120% when the length of overhanging edge is away from the optimal length ofoverhanging edge of the same beam. The convergence from the optimal length of overhanging edge may lead to good relative economy of the beam.

كرس هذا البحث لدراسة تأثير الطول المتماثل للحافةالناتئة في العتبات الخرسانية المسلحة ذو الحمل المنتظم والاسناد البسيط على العزم المطلق الاعظم. استخدم وبنجاح برنامج التحليل والتصميم المشهورSTAAD Pro V8i والمستخدم من قبل مهندسي الانشاءات لتحليل وتصميم النماذج المجسمة وباستعمال المواد المختلفة. جميع الحسابات تمت بالاعتماد على متطلبات التحليل المرن والتصميم بطريقة المقاومة القصوى للمواصفة الأمريكية ACI 318M-14 ومحدداتها للانثناء والانحراف.القد اتبت ان العتبة التي لها طول أمثل للحافة الناتئة يساوي 0.35 من طول العتبة بين المساند، لها عزم اعظم موجب مساوي للعزم الاعظم السالب ولها أمثل عزم مطلق اعظم بالمقارنة مع العتبة ذاتها واطوال اخرى للحافاتالناتئة. اوضحت حالات مختلفة للعتبات ان مساحة تسليح الشد يمكن ان يزداد بنسبة قد تصل الى 120% عندما يبتعد طول الحافة الناتئة عن الطول الامثل. ان الاقتراب من الطول الامثل للحافة الناتئةربما سوف يؤدي الى الاقتصاد النسبي للعتبات.} }