TY - JOUR ID - TI - Flexural Behavior of Continuous Bubbled Reinforced Reactive Powder Concrete Flat Slab AU - Mohammad Redha K. Mahmood AU - Mustafa B. Dawood PY - 2017 VL - 25 IS - 2 SP - 504 EP - 517 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper presents an experimental investigation on flexural behavior of continuous bubbled reinforced Reactive Powder Concrete (RPC) flat slabs. Bubbled slab is one of the various types of voided slabs. It consist of bubbles placed inside a concrete slab which will reduce the self-weight of the structure by about 35% (Tina Lai 2009). On the other hand, using RPC make it possible for structural member to have smaller dimensions due to the great strength of this type of concrete. In this study these two method are used to increase the building spaces dimensions by reducing self-weigh of the structure by using bubbled slabs and to decrease the structural members' dimensions by using RPC have been investigated together.To study the flexural behavior of continuous bubbled flat slabs such as the ultimate load carrying capacity, central deflection and slabs crack pattern at the ultimate load, seven types of slabs were tested. The parameters of the study were type of concrete (RPC and Normal Concrete (NC)), bubbles diameter to slab thickness ratio (D/t) of (0.6 and 0.7), type of loading (distributed and line load) and solid slab. The test results show that the crack pattern and ultimate load capacity as well as maximum deflection depends on all of the mentioned parameters, were by increasing (D/t) ratio the ultimate load capacity increases about (7.36%, 5.46% and 16.52%) for RPC slabs under distributed load, line load and NC slabs, respectively. The solid slab increases the ultimate load about (4.05%) compare to bubbled slab. Also, the line load decreases the ultimate load compare to distributed load by (3.45-5.16%) for different (D/t) ratio, and using the NC also decreases the ultimate load compare to RPC by (48-52.13%) for different (D/t) ratio.

يهتم هذا البحث بدراسة تحمل الانثناء للبلاطات الخرسانية المستمرة الفقاعية ذات المساحيق الفعالة. البلاطات الفقاعية هي أحد انواع البلاطات المجوفة والتي تتكون من كرات بلاستيكية توضع بداخل الخرسانة والتي تقلل من الوزن الذاتي للبناية بمقدار 35%. من طرف أخر، استخدام خرسانة ذات المساحيق الفعالة تقلل ابعاد الاعضاء الانشائية نتيجة لمقاومتها العالية. في هذا البحث تم التحري على هذين العاملين وهما زيادة ابعاد الفضاءات الداخلية بتقليل الوزن الذاتي باستخدام البلاطات المجوفة وتقليل ابعاد الاعضاء الانشائية باستخدام خرسانة ذات المساحيق الفعالة. لدراسة سلوك الانثناء للبلاطات المستمرة والمجوفة والمتمثل بـ (الحمل الاقصى، الانحراف المركزي وشكل التشققات)، تم اختبار سبعة انواع من البلاطات. المتغيرات في هذه الدراسة تشمل نوع الخرسانة (خرسانة الاعتيادية والخرسانة ذات المساحيق الفعالة)، نسبة قطر الكرة إلى سمك البلاطة بقيمة (0.6 و 0.7)، طريقة التحميل (الحمل المنتشر والحمل الخطي) واستخدام نموذج صلد (الغير المجوفة). نتائج الاختبار أظهرت أن شكل التشققات والتحمل الاقصى وكذلك الانحراف المركزي يعتمد على جميع العوامل المذكورة اعلاه، حيث بزيادة نسبة قطر الكرة الى سمك البلاطة تم ازدياد التحمل الاقصى بحدود (7.36%، 5.46% و16.52%) لبلاطات ذات المساحيق الفاعلة والمعرضة الى الحمل المنتشر، الحمل الخطي والبلاطة الخرسانة الاعتيادية، على التوالي. البلاطة الصلدة تزيد التحمل الاقصى بحدود (4.05%) مقارنة مع البلاطة المجوفة. كذلك، التحميل الخطي يقلل من التحمل الاقصى مقارنة مع التحميل المنتشر بحدود (3.45-5.16%) لنسب المختلفة من قطر الكرة الى سمك البلاطة، وكذلك استخدام الخرسانة الاعتيادية تقلل من التحميل الاقصى مقارنة مع الخرسانة ذات المساحيق الفعالة بحدود (48-52.13%) لنسب المختلفة من قطر الكرة الى سمك البلاطة. ER -