TY - JOUR ID - TI - Studying the effect of Strontium Titanate on the Dielectric Constant of the Barium Titanate دراسة تأثير اضافة تيتانات السترونتيوم على ثابت العزل الكهربائي لتيتانات الباريوم AU - كنعان محمد موسى PY - 2016 VL - 2 IS - 21 SP - 169 EP - 176 JO - Al-Qadisiyah Journal of Pure Science مجلة القادسية للعلوم الصرفة SN - 19972490 24113514 AB - In this study, the effect of adding strontium titanate (SrTiO3) on the dielectric constant of the barium titanate (BaTiO3) was investigated. For this purpose, the BaTiO3 powder was first prepared by mixing barium carbonate (BaCO3) with titanium dioxide (TiO2) and sintering by vacuum furnace at 1200 ºC under Argon. Then, the SrTiO3 powder was prepared by mixing strontium carbonate (SrCO3) with titanium dioxide (TiO2) and sintering at 1150 ºC. Different weight percentages (5-50 %) of SrTiO3 were added into the BaTiO3 and mixed for 72 hour to prepare different mixtures of (BaSr)TiO3 for electrical insulators. All samples of (BaSr)TiO3 insulators were compacted and sintered at 5 tons and 1350 ºC, respectively. The crystalline structural characterizations of the prepared powders as well as the (BaSr)TiO3 mixtures were analyzed by the X-ray diffraction (XRD). Values of the dielectric contacts and the bulk density for all prepared mixtures were measured. The results showed that the electrical insulators made from the mixture of 30 % SrTiO3 and 70 % BaTiO3 revealed the highest electric constant with a reasonable density.

في هذا البحث, تمت دراسة تأثير إضافة تيتانات السترونتيوم (SrTiO3) على ثابت العزل الكهربائي للتيتانات الباريوم (BaTiO3). لهذا الغرض، تم تحضير مسحوق تيتانات الباريوم أولاً من خلط كاربونات الباريوم (BaCO3) مع ثاني أوكسيد التيتانيوم (TiO2) وتلبيدها بواسطة فرن مفرغ تحت الأركون عند 1200 درجة مئوية . ومن ثم تحضير تيتانات السترونتيوم عن طريق خلط كاربونات السترونتيوم (SrCO3) مع ثاني أكسيد التيتانيوم (TiO2) وتلبيدها بدرجة 1150 مئوية. تمت إضافة نسب وزنية مختلفة (5-50٪) من تيتانات السترونتيوم الى تيتانات الباريوم وخلطها لفترة 72 ساعة من اجل اعداد خلطات مختلفة من (BaSr)TiO3 لتصنيع العوازل الكهربائية. جميع العينات حضرت بضغط كبس مقداره 5 طن ولبدت بدرجة حرارة مقدارها 1350 مئوية. تم اجراء تحليل حيود الأشعة السينية (XRD) للمساحيق المحضرة ولمسحوق (BaSr)TiO3 المعتمد لتحضير العوازل, كذلك قياس قيم ثابت العزل الكهربائي والكثافة الظاهرية لجميع الخلطات المحضرة. أظهرت النتائج أن العوازل الكهربائية المصنوعة من خليط 30٪ SrTiO3 و 70٪ BaTiO3 بانها تمتلك أعلى ثابت عزل كهربائي بكثافة معقولة. ER -