@Article{, title={Effect of Different Tool Geometries in Friction Stir Welding of AA 2024-T3 using Design of Experiments تأثير الاشكال المختلفة للعُدة في لحام المزج الاحتكاكي لسبيكة المنيوم AA2024-T3 بإستخدام طريقة تصميم التجارب}, author={Moneer H. Al-Saadi منير حميد السعدي and Sabah Khammass Hussein صباح خماس حسين and Mursal Luaibi Saad مرسل لعيبي سعد}, journal={Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية}, volume={20}, number={1}, pages={19-26}, year={2017}, abstract={In this work, Aluminum alloy (AA2024-T3) was welded by friction stir (FSW) method using different pin profile design types; straight cylinder, threaded cylinder, tapered cylinder hexagonal, square, and threaded taper. For each type, a flat and concave shoulder was used, as well as, the welding process was single and double. The results of mechanical tests are analyzed using design of experiments method (DOE). The best and weaken mechanical properties (tensile strength, bending force and hardness) are observed when the welding is achieved by hexagonal and straight cylinder pin profile respectively. A concave shoulder gave higher mechanical properties as compared with flat shoulder. The change in welding process type presented a sensible effect. Nugget zone hardness is higher than that of base metal for all specimens. The optimum hardness result is recorded by hexagonal pin with concave shoulder profile.

في هذا البحث، تم لحام سبيكة الالمنيوم (AA2024-T3) بطريقة المزج الاحتكاكي باستخدام انواع مختلفة التصميم لشكل النتوء؛ اسطوانة مستوية, اسطوانة مسننة، اسطوانة مغزلية، سداسي، مربع ومغزل مسنن. استُخدم لكل نوع كتف مسطح ومقعر، بالاضافة الى ذلك، كانت عملية اللحام منفردة ومزدوجة. تم تحليل نتائج الاختبارات الميكانيكية بأستخدام طريقة تصميم التجارب. افضل واضعف الخواص الميكانيكية ( مقاومة الشد، قوة الانحناء والصلادة) لوحظت عندما يُنجز اللحام بأستخدام النتوء ذو الشكل السداسي والاسطواني المستوي على التوالي. اعطى الكتف المقعر اعلى الخواص الميكانيكية مقارنة مع الكتف المسطح. اعطى التغيير في نوع عملية اللحام تأثير محسوس. صلادة منطقة خط اللحام اعلى من المعدن الاساس لكافة العينات. سُجلت امثل نتيجة صلادة بإستخدام النتوء السداسي ذو الكتف المقعر.} }