@Article{, title={A Comparitive Study of CNC Milling Cutting Path Strategies دراسة مقارنة لستراتيجيات مسار القطع باستخدام مكائن التفريز المبرمجة}, author={Ali Abbar Khleif علي عبار خليف and Majeed Nemat مجيد نعمت محمد and Hasan Nemah Khniefer حسن نعمه خنيفر}, journal={Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية}, volume={20}, number={1}, pages={214-221}, year={2017}, abstract={This paper investigates the effect of cutter path used in the milling process on the produced surface roughness using two different tools. The cutting paths which are named as; one directional, zigzag , Morph, overlap spiral and spiral are considered as cutter path strategies. The cutter path strategies greatly influenc the surface finish of the work pieces. The objective of this study is to investigate the best cutting characteristics and effects of cutting path for aluminuim using end mill and ball mill tools. MASTER CAM software has been used in design and producing NC CODE. The results indicate that the raw tool path strategy and flat end mill tool gives minimum roughness value with (0.15µm), while the spiral tool path strategy and ball end mill tool gives minimum roughness value with (0.76µm).

يتناول هذا البحث تأثير مسار عدة القطع بالتفريز على مقدار الخشونة السطحية الناتجة باستخدام عدتي قطع مختلفة. تم أعتماد مسارات القطع المعروفة بالأتجاهي، المتعرج، خلال عملية دوران العدة، والمسار الحلزوني للعدة. تعتبر هذه المسارات مؤثرة جدا على مقدار الخشونة السطحية للمشغولات الناتجة. ان اهمية البحث تتضمن الحصول على افضل خصائص لمسار القطع لعينات من الألمنيوم باستخدام عدد قطع بالتفريز ذات نهايات مستوية وكروية. تم في هذا البحث استخدام برنامج (MASTER CAM) لغرض النمذجة والحصول على الرموز التشغيلية الخاصة بمكائن القطع المبرمج. بينت النتائج بان المسار الخام الاتجاه المنتج بواسطة عدة تفريز ذات نهاية مستوية يعطي اقل قيم للخشونة السطحية (0.15µm)، بينما يوفر المسار الحلزوني المنتج باستخدام عدة ذات نهاية كروية اقل قيمة للخشونة السطحية (0.76µm).} }