TY - JOUR ID - TI - Preparation and Characterization Some of the Mechanical Properties of Polymer Nano Composite Material Used in Structural Applications تحضير وتوصيف بعض الخواص الميكانيكية لمادة متراكبة بوليمرية نانوية تستخدم في التطبيقات الهيكلية AU - Salam Obaid Abdulghani سلام عبيد عبدالغني AU - Wleed Bdaiwi Salih وليد بديوي صالح AU - Sihama Issa Salih سهامة عيسى صالح PY - 2016 VL - 34 IS - 13 Part (A) Engineering SP - 536 EP - 545 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Many polymeric materials are weak of direction in the mechanical properties, and which is one of the most important specifications required for structural applications. Therefore in this work, it was prepared two groups of composites nanomaterials, both of which contain the same matrix material, but they differ in terms of reinforcement materials. One of these groups consists of a poly ((methyl methacrylate (PMMA)) resin as a matrix material, which reinforced with magnesia (MgO) nano powder, with the average particles diameter (52.54) nm, which was prepared according to the ratios (PMMA: X% MgO) where (X = 0 , 0.5, 1 and 1.5) of the volume fraction ratio of nanoparticles in composites of material prepared, while the second group reinforced with alumina (AL2O3) nano powder, with a mean particles diameter (53.60) nm, according to the ratio (PMMA: X% AL2O3) where (X = 0, 0.5, 1 and 1.5) of the volume fraction of nanoparticles in composites of the prepared materials. And through this work, effect of the addition nanoparticles powders, on the some mechanical properties of the prepared samples, has been studied. The results showed that the mechanical properties of (Tensile strength, modulus of elasticity, compressive strength and hardness) increase with the increase of the volume fraction ratio of the alumina and magnesia nanoparticle content in composites material. As well as the results showed, that the nanocomposite samples (PMMA: X% Al2O3) have mechanical properties higher than their counterparts of nanocomposites samples, which are reinforced with magnesia nanoparticle at the same ratio.

العديد من المواد البوليمرية تكون ضعيفة اتجاه الخواص الميكانيكية والتي تعد من اهم المواصفات التي تتطلبها التطبيقات الهيكلية. وعليه في هذا العمل تم إعداد مجموعتين من المواد المتراكبة النانوية، كلاهما تحتوي على نفس مادة الاساس، ولكنهما يختلفان من حيث مواد التعزيز. احدى هذه المجموعات تتكون من راتنج البولي (ميثيل ميثا كريليت ((PMMA) كمادة الاساس والتي عززت بمسحوق المغنيسيا (MgO) النانوي وذات متوسط قطر جزيئي (52.54) نانومتر وقد حضرت العينات ووفقا لنسبة (PMMA: X% MgO) حيث ان (X= 0, 0.5, 1 and 1.5) من الكسر الحجمي للدقائق النانوية في المواد المتراكبة المحضرة ، في حين عززت المجموعة الثانية بمسحوق الألومينا (AL2O3) النانوي وذات متوسط قطر جزيئي (53.60) نانومتر ووفقا للنسب (PMMA: X%AL2O3) حيث ان (X= 0, 0.5, 1 and 1.5) من الكسر الحجمي للدقائق النانوية في المواد المتراكبة المحضرة. من خلال هذا العمل تمت دراسة، تأثير إضافة المساحيق الناتوية ، على بعض الخواص الميكانيكية للعينات المتراكبة المحضرة،. وبينت النتائج أن الخواص الميكانيكية المتمثلة (مقاومة الشد، معامل مرونة الشد, ومقاومة الانضغاط، والصلادة) تزداد مع زيادة نسبة الكسر الحجمي لمحتوى الدقائق النانوية لكل من الألومينا ومسحوق المغنيسيا في المواد المتراكبة المحضرة. كما أظهرت النتائج أن العينات المتراكبة (PMMA: X% Al2O3) تمتلك خصائص ميكانيكية أعلى من نظرائهم من العينات المتراكبة المدعمة بدقائق من مسحوق المغنيسيا النانوي عند نفس النسب. ER -