@Article{, title={Evaluation of Mechanical Strength of Epoxy Polymer Concrete Reinforcement with Different Types of Fibers قياس المقاومة الميكانيكية للايبوكسي بوليمر كونكريت مدعمة بانواع مختلفة من الالياف}, author={Mohammad R. Mohammad محمد راضي محمد and Seiwench N. Rafeeq سه وينج نور الدين and Rawabi A. Khammas روابي عبد الرزاق خماس}, journal={Ibn Al-Haitham Journal For Pure and Applied Sciences مجلة ابن الهيثم للعلوم الصرفة والتطبيقية}, volume={30}, number={1}, pages={63-72}, year={2017}, abstract={Polymer composite materials were prepared by mixing epoxy resin with sand particles in three different grain size (150-300 ), (300-600 ) and (600- 1200) μm . The weight of epoxy was 15%, 20%, 25% and 30% of the total weight. Compression strength and flexural strength tests were carried out for the prepared samples .The percentages of epoxy resin at 20% wt and 25% wt showed best mechanical properties for all grain sizes .These percentages were adopted to fill the void between particles sand which have two different size ranges (150-600) μm and {(150-300) & (600-1200)} μm respectively to obtain more dense material. The results showed that the strength of polymer composite at 20% resin is higher than 25% resin. The sample which has maximum value for compression strength and flexural strength was reinforced with fibers (glass, polypropylene and alucobond waste) by weight 1% and 1.5% respectively of the weight of epoxy resin.

حضرت مادة متراكبة بوليمرية بخلط راتنج الايوكسي مع الرمل لثلاثة احجام حبيبية مختلفة هي (150-300) و(600-300) و (600-1200) مايكرون . وزن الايبوكسي كان 15% ,20% ,25% ,30% ,من الوزن الكلي . فحصي مقاومة الانضغاط ومقاومة الانحناء اجري على العينات المحضرة. النسب الوزنية لراتنج الايبوكسي عند20 % و25% اظهرت افضل الخصائص الميكانيكية لكل الاحجام الحبيبية . اعتمدت هذه النسب لملئ الفراغات بين حبيبات الرمل التي تمتلك حجمين مختلفين(150-600) و}(150-300) &(600-1200){ μmعلى التوالي للحصول على مادة ذات كثافة اكبر. اظهرت النتائج بأن مقاومة المتراكبات البوليمرية عند النسبة20% كانت اعلى من تلك عند 25% . العينات التي تمتلك اعلى قيمة لمقاومة الانضغاط والانحناء دعمت بالألياف (ألياف الزجاج ,ألياف البوليبروبلين ,ألياف مخلفات الاليكوبوند) بنسب 1% و1.5% من وزن راتنج الايبوكسي .} }