TY - JOUR ID - TI - Influence of Temperature Upon Permanent Deformation Parameters of Asphalt Concrete Mixes تأثير درجات الحرارة على معاملات التشوهات الدائمية للخلطات الإسفلتية AU - Amjad Hamad Albayati أمجد حمد البياتي AU - Aliaa Faleh Hamd Al.ani علياء فالح حمد العاني PY - 2017 VL - 23 IS - 7 SP - 14 EP - 32 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The performance of asphalt concrete pavement has affected by many factors, the temperature is the most important environmental one which has a large effect on the structural behavior of flexible pavement materials. The main cause of premature failure of pavement is the rutting, Due to the viscoelastic nature of the asphalt cement, rutting is more pronounced in hot climate areas because the viscosity of the asphalt binder which is inversely related to rutting is significantly reduced with the increase in temperature resulting in a more rut susceptible paving mixtures. The objective of this study is to determine the effect of temperatures variations on the permanent deformation parameters (permanent strain (p), intercept (a), slope (b), Alpha and Mu) as well as resilient strain (r) and resilient modulus (Mr). To achieve this objective, one aggregate gradation with 12.5mm nominal maximum size, two grades of asphalt cements (40-50 and 60-70) brought form Al- Daurah refinery, limestone dust filler has been used to prepare the asphalt concrete mixtures. 30 Marshall specimens were prepared to determine the optimum asphalt cement content. Thereafter, 30 cylindrical asphalt concrete specimens (102mm in diameter and 203 mm in height) are prepared in optimum asphalt cement and optimum ±0.5 percent. The prepared specimens were used in uniaxial repeated load test to evaluate the permanent deformation parameters of asphalt concrete mixes under the following testing temperature (5, 15, 25, 40 and 60̊c). The test result analyses appeared that Mr is decrease 51 percent when temperature increased from 5 ̊c to 25 ̊c and then decrease 22 percent with further increase in temperature from 25 ̊c to 60 ̊c. Also, the Alpha value decreases by a factor of 1.25 and 1.13 when temperature increases from 5 ̊c to 25 ̊c and 25 ̊c to 60 ̊c, respectively. Finally, statistical models were developed to predict the Alpha and Mu parameters of permanent deformation.

أداء التبليط الإسفلت يتأثر بعدة عوامل و درجة الحرارة هي واحدة من العوامل المناخية المهمة التي لها اكبر تأثير على أداء السلوك الانشائي لمواد الرصف المرنة .ان السبب الرئيسي للفشل المبكر للطرق هو التخدد ونظرا لطبيعة الاسفلت اللزجة/المرنة فالتخدد يظهربكثرة في المناطق المناخية الحارة لان لزوجة الاسفلت ترتبط عكسيا مع التخدد الذي يقل بشكل ملحوظ مع ارتفاع درجات الحرارة وبالنتيجة يعطي حساسيه اكبر للتخدد لطبقات التبليط . ان الهدف من هذه الدراسة هو لتحديد تأثير درجات الحرارة المختلفة على معاملات التشوهات الدائمية ومعامل المرونة ولتحقيق هذا الهدف تم اختيار تدرج واحد للركام بمقاس اسمي اقصى(12.5) ملم ونوعين اسفلت ذو اختراق (40-50)(60-70) من مصفى الدورة وقد تم استخدام الحجر الجيري المطحون كمادة مالئة. استخدمت هذه المواد لتحضير( 30) نموذج مارشال لغرض تعيين نسبة الاسفلت المثلى, وكذلك تم تحضير( 30) نموذج اسطواني من الخرسانة الاسفلتية ( 102ملم قطر,203ملم ارتفاع) تم تهيئتها بنسبه الاسفلت المثلى وكذلك نسبة ±0.5% من النسبةالمثلى . استخدم في الاختبار جهاز الحمل المتكرر لتقييم معاملات التشوه الدائمي لخلطات الاسفلت بدرجات حرارة (60,40,25,10,5)ºم .نتائج الفحوصات وتحليل النتائج اظهرت ان معامل المرونة يقل بمقدار 51% عند زيادة درجة الحرارة من5 الى25º م ونقصان 22% مع زيادة درجة الحرارة من 25 الى 60ºم وايضا قيمة الفا تقل بمقدار 1.25و1.13 عند زيادة درجة الحرارة (5-25)ºم و(25-60)ºم على التوالي. واخيرا تم تطوير موديلات احصائية للتنبؤ بقيم المعاملات الفا وMu للتشوهات الدائمية. ER -