@Article{, title={Study of Some Mechanical and Physical Properties of Cold Curing Acrylic Resin Reinforced with Particle Yttrium Oxide}, author={Bassam Ibrahim Khalil Mohammed Ramidh Gharkan Sally Abdulhussain Kadhum Ahmad Hashim Aliwi University of Technology, Department of Materials Eng}, journal={journal of the college of basic education مجلة كلية التربية الاساسية}, volume={23}, number={97/علمي}, pages={1-12}, year={2017}, abstract={Study of Some Mechanical and Physical Properties of Cold Curing Acrylic Resin Reinforced with Particle Yttrium OxideBassam Ibrahim Khalil Mohammed Ramidh Gharkan Sally Abdulhussain Kadhum Ahmad Hashim Aliwi University of Technology, Department of Materials EngBranch of Polymer Materials EngAbstract Over the past thirty years, composite materials are being used extensively in many applications; this is due to proven fact that composite materials such as high stiffness, high strength, low thermal conductivity. In this study we used particle Yttrium oxide (5%, 10%, 15% and 20%) as reinforcement to cold curing acrylic resin. Many mechanical and physical tests were used to determine the properties of the prepared composite material which involved tensile strength, toughness, hardness, thermal conductivity, density and water absorption. The results had shown that the tensile strength and toughness decreased with increasing weight fraction of Y2O3. The hardness has been increased with increasing weight fraction of yttrium oxide especially at (5%, 10%, 15%). thermal conductivity increased with increasing volume fraction of yttrium oxide, maximum density was obtained at (15% wt.) of Y2O3 reinforced composites. Water absorption decreased with increasing weight fraction of Y2O3.Keywords: cold curing acrylic resin, particle Yttrium oxide, reinforced, Mechanical properties, physical properties. 

الخلاصة :على مدى السنوات الثلاثين الماضية استخدام المواد المركبة على نطاق واسع في العديد من التطبيقات. ويرجع ذلك إلى هذا أن المواد المركبة تتحسن فيها الصفات مثل زيادة الصلابة ، والمتانه ، وانخفاض التوصيل الحراري. في هذه الدراسة استخدمنا جسيمات أكسيد اليتيريوم بنسبه (5٪، 10٪، 15٪ و 20٪) كتعزيز لراتنج الاكريليك البارد. وقد استخدمت العديد من الاختبارات الميكانيكية والفيزيائية لتحديد خصائص المواد المركبة المحضره مثل اختبار قوة الشد، اختبار الصلابة، اختبار التوصيل الحراري و اختبار الكثافة وامتصاص الماء. إن النتائج أظهرت أن قوة الشد والمتانة انخفضت مع زيادة الوزن من جسيمات Y2O3 ازدادت صلابة مع زيادة الوزن من أكسيد الإيتريوم خاصه عند نسبه (5٪، 10٪، 15٪). التوصيلية الحرارية تزداد مع زيادة نسبه حجم أكسيد الإيتريوم، تم الحصول على أقصى قدر من الكثافة عند تعزيز المتراكبة بوزن (15٪) من Y2O3 .لقد انخفض امتصاص الماء مع زيادة النسبة الوزنية من Y2O3} }