@Article{, title={MODELING OF ONE DIMENSIONAL FLOW OVER SEMICIRCLE CRESTED WEIR PROFILE USING (HEC-RAS) PROGRAM نمذجة جريان احادي البعد لتصريف فوق سد غاطس نصف دائري الحافة بأستخدام برنامج (RAS-HEC)}, author={Ruaa Riyad rhmaan رؤى رياض and Thabet mohammed abdulatif ثابت محمد}, journal={DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية}, volume={10}, number={2}, pages={48-59}, year={2017}, abstract={A semicircle crest profile extending across full width of laboratory channel (suppressed) provides measurements of discharge – head under free flow condition. According to these measurements an empirical head – discharge relationship has been established. Dimensional analysis is carried out to establish independent parameter (R/H) which represents relative crest curvature and dependent parameter (q/〖g^(1⁄2) H〗^(3⁄2) ) . Regression analysis and solver function in Microsoft excel is used to determine the flow equation, to obtain a relationship between depending discharge and the independent parameters affecting the flow. Non-linear equation for estimating the discharge coefficient of the weir model was developed. The accuracy of HEC-RAS software is examined for describing water surface profiles, computation of rating curve and the occurrence of the critical depth .The HEC-RAS program results are compared with the laboratory measurements. Yield affair agreement between them. The weir coefficient of semicircle crest profile is greater than that for the basic broad crested weir and the flow upstream of the weir is subcritical .Transitional flow occurs on the weir crest and the flow along downstream weir face is supercritical within the range of modular discharges.

تم في هذا البحث استخدام سد غاطس ذو حافة نصف دائرية موضوع على عرض القناة المختبرية (غير مقلص) في قياس معدل الجريان المار عبر السد والشحنة في مقدم السد الغاطس تحت ظروف جريان حر. من خلال هذه النتائج المختبرية تم ايجاد معادلة تجريبية ما بين التصريف و الشحنة المقاسة. بأستخدام طريقة التحليل البعدي تم ايجاد علاقة مابين المتغير المستقل (R/H) الذي الذي يمثل (التقوس النسبي للحافة) و المتغير المعتمد اللابعدي q/〖g^(1⁄2) H〗^(3⁄2) . وبتطبيق طريقة الانحدار المتعدد في برنامج المايكروسوفت اكسل تم ايجاد معادلة لحساب التصريف الذي يمثل المتغير المعتمد والمتغيرات المستقلة المؤثرة في الجريان ومعادلة لحساب معامل التصريف بدلالة المتغير المستقل ((R/H.تم تشغيل برنامج (HEC-RAS) لحالة الجريان الثابت و حساب المقاطع الطولية ومنحني المعايرة والعمق الحرج للجريان والتحقق من نتائج البرنامج عند المقارنة مع القراءات المختبرية والتي اظهرت عن توافق جيد .ان معامل السد ذو الحافة النصف دائرية هو اكبر من معامل السد العريض الحافة وهنالك انتقال للجريان من جريان تحت الحرج في مقدم السد الى جريان فوق الحرج في مؤخرة السد مارا بالحالة الحرجة في قمة السد ضمن حدود الحريان الحر.} }