TY - JOUR ID - TI - BEHAVIOR OF HYBRID REINFORCED CONCRETE BEAMS COMBINING REACTIVE POWDER CONCRETE AND VARYING YTPES OF LIGHTWEIGHT CONCRETE سلوك الانثناء للعتبات الخرسانية المسلحة الهجينة المتكونة من خرسانة عالية المقاومة وأنواع مختلفة من الخرسانة خفيفة الوزن AU - Yaarub G. Abtan AU - Hind T. Jaber PY - 2016 VL - 20 IS - 2 SP - 204 EP - 223 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The main objective of this research was studied the flexure behavior of hybrid reinforced concrete beams combining reactive powder concrete (RPC) and lightweight concrete (LWC). The experimental work consists of casting and testing in flexure 12 simply supported reinforced concrete beams. The dimensions of (12) beams were geometrically similar, having rectangular cross-section, of dimensions (125×200×1600) mm. Lightweight concrete was used in tension layer and reactive powder concrete was used in compression layer for all hybrid concrete beams. The main variables were type of concrete (LWC and RPC), thicknesses of RPC layer (hR =0, 50 and 100) mm, volumetric steel ratios (Vf =1%) in LWC and type of LWC (porecilenite aggregate, polystyrene and sawdust). The results showed that the characteristic strength (first and ultimate loads) was increased when the thickness of RPC layer was increased; this increased percentage were (7-100) % and (32-133) % respectively for first cracking loads and ultimate loads. In addition to that, these parameters were decreased the values of deflection from (1-17) %. However that it can be seen from the experimental results, the concrete with steel fiber and porecilenite had more effective than the concrete with other types of aggregate (sawdust and polystyrene). Also the concrete with porecilenite type reflected more number of cracks than sawdust and polystyrene, respectively. All beams failed by flexure mode without any shear cracks which achieved by yielding of tensile steel in the tension zone. Also, for all hybrid beams, the slip was absent between the concrete layers.

يستعرض البحث الحالي دراسة عملية لسلوك الانثناء للعتبات الهجينة المتكونة من خرسانة عالية المقاومه و الخرسانة خفيفة الوزن. يتضمن العمل المختبري صب وفحص أثنتا عشر عتبه خرسانية مسلحة بسيطة الاسناد ((simply supported. كانت أبعاد (12) عتبه متماثلة هندسيا، ذو مقطع عرضي مستطيل ،وبأبعاد mm (125×200×1600). أما المتغيرات الرئيسة لهذا البحث فهي نوع حيث تم استخدام خرسانة المساحيق الفعالة والخرسانه خفيفة الوزن,سمك طبقة خرسانة المساحيق الفعالة (hR =0, 50 and 100) mm,تم استخدام نسبه (%1) لألياف الحديد في طبقه الخرسانه الخفيفة الوزن ونوع خرسانه خفيفة الوزن (حجر البورسلنايت , كرات الفلين ونشارة الخشب ). أظهرت النتائج المختبرية أن خصائص المقاومة ( الشقوق الأولى و الاحمال القصوى ) تزداد عند زياده ارتفاع طبقة خرسانة المساحيق الفعالة , هذه الزيادة المؤية كانت تتراوح مابين (7-100)% و (32-133) بالتتابع لأحمال الشقوق الاولى والأحمال القصوى. بالأضافه الى ذالك هذه المتغيرات نقصت من قيمة الهطول بمقدار (1-17)%. بينما تمت الملاحظة من خلال النتائج المختبرية أن الخرسانة مع الياف الحديد و البورسلنايت تكون أكثر فعالية من خرسانة الأنواع الأخرى من الركام ( كرات الفلين ونشارة الخشب). كذلك الخرسانة المكونة من البورسلنايت تظهر أكثر تأثيرا في عدد الشقوق من الفلين ونشارة الخشب تتابعا. كل العتبات قد فشلت بالأنثناء بدون اضهار أي شقوق قص أي حديد التسليح الحد الأقصى. كذلك لكل العتبات الهجينة, لم يظهر الانزلاق بين طبقات الخرسانة. ER -