TY - JOUR ID - TI - SELECTING OF AN EFFECTIVE ADSORBENT FOR TREATING PHOSPHATE CONTAMINATION اختيار ماده ممتزه فعالة لإزالة تلوث الفوسفات AU - Ahmed Hassoon Ali AU - Younis Swadi Tlaiaa AU - Lahieb Faisal M. Ali AU - Ali Qasim Rdhaiwi PY - 2016 VL - 20 IS - 5 SP - 136 EP - 155 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - : Experimental researches on adsorptive capacity of: Granular Activated Carbon GAC, Phosphate Rock PR, Saw Dust SD and Rice Husk RH for phosphate removal from simulated wastewater were conducted. Results showed that removal efficiency of four adsorbents were in the consequence as: RR (82.6%) ˃ SD (43.72%) ˃ GAC (41.28%) ˃ RH (34.4%). To understand the action of phosphate uptake, factors influencing the adsorption process using best adsorbent (PR) including pH, mixing speed, contact time, weight of the adsorbent, initial phosphate concentration and temperature were investigated. It was found that the equilibrium data fitted very well to the Langmuir model with high determination coefficient (R2). The maximum uptake capacity (qmax) was 24.716 mg/g. Adsorption data were modeled using the pseudo-first, pseudo-second-order, Intraparticle diffusion and Elovich models. It was found that, the pseudo- second-order kinetic equation could best describe the adsorption kinetics. Thermodynamic parameters showed that the adsorption of investigated phosphate onto PR was exothermic, spontaneous in nature and the process is physiosorption. It was found that sodium hydroxide (0.1 M NaOH) was efficient desorbent solution in recovery of phosphate pollutant among different desorbents: HCl, H2SO4, NaOH, Na2CO3, EDTA and deionized distilled water (DDW) from PR. The breakthrough curves for the adsorption column test was obtained in a continuous adsorption fixed-bed experiment, The measured breakthrough times for RH, GAC, SD and PR were found to be 10, 30, 40 and 60 min, respectively.

: تم في هذه الدراسة بحث القابلية الامتزازية لكل من : الكاربون المنشط الحبيبي (GAC)، الصخور الفوسفاتية (PR)، نشارة الخشب (SD) وقشور الرز (RH) لإزالة الفوسفات من المياه الملوثة المصنعة. لقد بينت النتائج ان كفاءه الازالة لكل من المواد الممتزة الاربعة هي على النحو التالي: الصخور الفوسفاتية (82.6%) ˂ نشارة الخشب (43.72%) ˂ الكاربون المنشط الحبيبي ˂ (41.28%) ˂ قشور الرز (34.4%). ولفهم آليه أزاله الفوسفات فان العوامل المؤثرة على عمليه الامتزاز باستخدام أفضل مادة ممتزة (الصخور الفوسفاتية) متضمنه كل من : الرقم الهيدروجيني ، سرعة المزج، وقت التلامس، وزن المادة الممتزة، التركيز الابتدائي ودرجة الحرارة سوف يتم اختبارها. لقد تم اكتشاف ان النتائج العملية تنطبق بصورة جيدة جداَ مع النموذج الرياضي لانكَمير وبمعامل ارتباط عالي وكانت أكبر سعة امتزاز (qmax) 24.716 ملغم/غم .نتائج الامتزاز تم تطبيقها على موديلات الحركة من الدرجة الاولى، الثانية، الانتشار الداخلي وموديل أيلوفج حيث بينت النتائج ان موديل الحركة من الدرجة الثانية يمثل نتائج الامتزاز بصورة جيدة. محددات الحرارة التي تم ايجادها لعملية امتزاز الفوسفات على الصخور الفوسفاتية بينت ان العملية تلقائية وفيزيائية بطبيعتها. لقد تم ايجاد ان هيدروكسيد الصوديوم (0.1M) هو الأكفأ في استعاده الفوسفات من الصخور الفوسفاتية من بين عده محاليل اعاد امتزاز هي HCl, H2SO4, NaOH, Na2CO3, EDTA ، DDW. منحنيات الانكسار لعمود الامتزاز تم الحصول عليها من تجارب الامتزاز ذات النمط المستمر. اوقات منحنيات الانكسار تم ايجادها لكل من RH, GAC, SD and PR لتكون 10، 30، 40 و 60 دقيقة على التوالي. ER -