TY - JOUR ID - TI - EFFECT OF ADDING NANO – POWDER ON COMPOSITE PIPES BEHAVIOR SUBJECTED TO MULTI STRESSES تاثير اضافة مسحوق النانو على سلوك الانابيب المركبه موضوعه تحت تاثير اجهادات متعدده AU - Fatima Abd Al Majaid Mahmoud AU - Ehsan Sabah Al-Ameen AU - Fadhel Abbas PY - 2017 VL - 21 IS - 4 SP - 184 EP - 200 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - This paper presents numerical, analytical and experimental studies of composite system for the Nano composite pipe. Woven roving and roving (fiber glass and carbon) composite pipes with (2%) Carbon Nano powder /epoxy composite and (50%) volume fraction have been tested. The experimental work included manufacturing pipe specimens by two techniques; first was filament winding technique using roving materials and second was vacuum bag technique which used woven roving materials. Also filament device was designed and manufactured. Manufacturing of composite pipes has been done as a conventional pipe for inner diameter of (100mm) and wall thickness of (4mm). In numerical work: the ANSYS package version (11) with element shell (63) was applied to investigate the effect of internal pressure on composite pipes. Test rig was designed and perform to study the effects of internal pressure and bending load on composite pipes, as well as the tensile test was done for the specimens. In analytical solution expression was achieved to define the effects of combined stresses on composite pipes.

يمثل هذا العمل دراسة الجانب التحليلي ,العددي والعملي للانابيب المركبه بدون ومع اضافة النانو .لقد تم اختبار الانابيب المركبه المصنعه من الالياف الخيطيه والمحاكه (الزجاجيه والكاربونيه ) مع اضافة نسبة (2%) من مسحوق النانو كربون /ايبوكسي وبنسبه حجميه مقدارها (50%) .يتضمن الجانب العملي تصنيع عينات الانابيب بتقنيتين احدهما تقنية لف الخيوط باستخدام الالياف الخيطيه والثانيه تقنية سحب الهواء باستخدام الالياف المحاكه . كذلك تم تصنيع الانابيب المركبه بالشكل التقليدي بقطر داخلي مقداره (100 ملم) وسمك مقداره (4 ملم) . اما في الجانب التحليلي تم استخدام ANSYS ,Version 11,Shell 63 .وذلك لبيان تأثير الضغط الداخلي على الانابيب المركبه . تصميم وبناء منظومة الاختبارلدراسة تأثير الضغط الداخلي وحمل الانحناء على الانابيب المركبه كان من اهم فقرات الجانب العملي ,كذلك تم عمل اختبارات الشد لجميع العينات .اما في الجانب العددي فقد تم ايجاد صيغه لبيان تأثير الاجهادات المركبه الناتجه من الضغط الداخلي وحمل الانحناء معا" على الانابيب المركبه. ER -