@Article{, title={STUDY THE EFFECT OF NANO MATERIALS ADDITION ON SOME PROPERTIES OF CEMENT MORTAR}, author={Fadhil A. Rasin and Laith K. Abbas and Mohammed J. Kadhim}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={21}, number={5}, pages={159-170}, year={2017}, abstract={This study involves nano-materials addition and interaction with cement mortar behavior for many mortar samples under variable curing time with constant water to cement ratio (W/C = 0.5). In this research some properties such as (hardness and water absorption test), were affected by adding small ratios of nano-particles (SiO2 or Al2O3) as replacements to the Ordinary Portland Cement (OPC) / type (I). The percentages of nano materials additives replacement on the mixture of mortar include (1, 2, 3, 4 and 5%) for both nano materials with constant (W/C) ratio. Also the amount of the fine aggregate used was three times the amount of cement. The results showed that, the hardness of the mortars for both nano materials gives better properties than mortar without nano materials in all tests. Best enhancements in properties for mortars with nano silica were achieved with (3%) additives while were achieved with nano alumina at (2%) additives.

تتضمن الدراسة اضافة المواد النانوية وتداخلاتها مع سلوك مونة الاسمنت لكثير من العينات تحت تاثير اوقات متغيرة للمعالجة مع نسبة ثابة للماء وبنسبة (W/C = 0.5). في البحث الحالي بعض الخواص الميكانيكية(اختبارخاصية الصلادة) والفيزياوية (اختبار امتصاص الماء) ، تأثرت من خلال اضافة نسب صغيرة من جسيمات نانوية (SiO2 or AL2O3) وكأضافات الى الأسمنت البورتلاندي العادي (OPC) نوع (I). النسبة المئوية للمواد النانوية المضافة الى خليط من عينات مونة الاسمنت كانت (1، 2، 3، 4، 5%) لكلا المواد النانوية المضافة ، كما استخدم الركام الناعم بثلاثة أضعاف كمية من الاسمنت المستخدم. اضهرت النتائج تحسن وارتفاع صلادة مونة الاسمنت لكل العينات الحاوية على مواد نانوية بالمقارنة مع العينات بدون المواد النانوية المضافة ولكل الأختبارات. تم الوصول الى افضل تحسن في الخصائص للعينات المضاف اليها النانو السيليكا عند نسبة (3%) بالمقارنة مع العينات المضاف اليها النانو الومينا والذي تحقق بنسبة (2%) مواد نانوية مضافة.} }