@Article{, title={STUDY THE EROSION WEAR BEHAVIOR FOR UNSATURATED POLYESTER RESIN COMPOSITES MATERIALS REINFORCED BY CARBON FIBERS WITH AL2O3 POWDER USING TAGUCHI METHO}, author={Reem Alaa Mohammed and Rajaa Kamil Majeed and Dalia Mohammed Gomaa}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={21}, number={5}, pages={213-224}, year={2017}, abstract={this research investigates the erosion wear behavior of polyester resin composites materials reinforced with 4% volume fraction carbon fiber and (2%, 4%, 6% and 8%) volume fraction Al2O3 powder. These specimens were fabricated by hand lay-up technique. Erosion wear behavior was studied at different variables, are angles impingement (30º, 60º, 90º), with dry silica sand particles size (350,425,600 µm) at 10 hour, stand-off distance (17 cm) and flow rate (35 L ∕min). In this research erosion testing were carried out according to ASTM G76 and study effect of parameters on erosion wear rate by using Taguchi orthogonal arrays L9. The results indicate that, the specimen (UP+4%C.F+8% Al2O3) has high value of true density than other specimens. Also the specimen (UP+4%C.F+8% Al2O3) has (0.00011 cm3/gm) better erosion rate resistance at variables (425 µm , 30 º ) as compare to other composite materials . The ANOVE analysis showed that filler content factor (Al2O3) powder more effect on erosion rate than other factors

في هذا البحث تم التقصي عن سلوك بلى التعرية لمواد متراكبة من رانتج البولي استر غير المشبع المقواة مع كسر حجمي4 % من الالياف الكاربون ومسحوق الالومينا بكسور حجمية (2%,4 %, 6% و 8%), صنعت هذة العينات بتقنية الصب الیدوي . تم دراسة سلوك بلى التعرية عند متغيرات مختلفة وكانت زاوية التصادم (30º, 60º, 90º) و حجم دقائق رمل السيكا الجافه 350,425,600 µm)) مايكرون عند 10 ساعات و مسافة التصادم (17cm ) و معدل جريان (35 L∕min) . في هذا البحث كان اختبار بلى التعرية وفقا (ASTM G76) و دراسة تأثير المتغيرات على معدل بلى التعرية بواسطة استخدام المصفوفات المتعامدة لتاكوجي L9 . اشارت النتائج ان عينة (UP+4%CF+8%Al2O3) تمتلك اعلى قيمة من الكثافة الحقيقية من العينات الاخرى . ايضا من النتائج يمكن ملاحظة ان العينة (UP+4%C.F+8% Al2O3) تمتلك (( 0.00011 cm3/gm) افضل مقاومة لتعرية عند المتغيرات (425 µm , 30 º ) كمقارنة مع المواد المتراكبة الاخرى . تحليل الانوفا اظهر بان عامل محتوى الحشوه لدقائق (Al2O3 ) هو الاكثر تاثيرا على معدل التعرية من العوامل الاخرى} }