@Article{, title={Experimental Investigation of Nano Alumina and Nano Silica on Strength and Consistency of Oil Well Cement التحري المختبري للنانواولومينات و النانوسيليكا على مقاومة و تماسكية سمنت الابار النفطية}, author={Hassan Abdul Hadi حسن عبد الهادي and Hassan Abdul Ameer حسن عبد الامير}, journal={Journal of Engineering مجلة الهندسة}, volume={23}, number={12}, pages={51-69}, year={2017}, abstract={In oil and gas well cementing, a strong cement sheath is wanted to insure long-term safety of the wells. Successful completion of cementing job has become more complex, as drilling is being done in highly deviated and high pressure-high temperature wells. Use of nano materials in enhanced oil recovery, drilling fluid, oil well cementing and other applications is being investigated. This study is an attempt to investigate the effect of nano materials on oil well cement properties. Two types of nano materials were investigated, which are Nano silica (>40 nm) and Nano Alumina (80 nm) and high sulfate-resistant glass G cement is used. The investigated properties of oil well cement included compressive strength, thickening time, density, free water and rheological properties. All tests are conducted according to API specification and proceed in Laboratory of Drilling in Petroleum Technology Department in University of Technology and in Missan Oil Company. The experimental results show that NS and NAL behave like accelerators when added to cement and work to increase the compressive strength at 38°C but these increasing in compressive strength changes when the temperature is increased to 60°C. Also, adding NS and NAL lead to increasing in rheological parameter and reduce free water but the change in density is very small. The results show that the effect of NAL on compressive strength and thickening time is greater than the effect of NS but the effect of NS on free water and rheology is greater than the effect of NAL.

في عمليات تسميت أبار النفط والغاز فان وجود غلاف أسمنتي صلب يحيط بالبطانة هو من الامور المهمة لضمان سلامة طويلة الأجل للأبار. ان أكمال عمليات التسميت بنجاح أصبح أكثر تعقيدا بسبب زيادة الانحراف بعمليات الحفر وكذلك بسبب الضغوط و درجات الحرارة العالية للابار لذلك بدأت الدراسات وعمليات التحري عن أستخدام المواد النانوية في تطبيقات الاستخلاص المعزز للنفط و سوائل الحفر و عمليات التسميت وبقية التطبيقات الاخرى. هذه الدراسة هي محاولة للتحري عن تأثير مواد النانو على خصائص أسمنت آبار النفط. تم أستعمال نوعين من مواد النانو والتي هي نانو السيليكا (أصغر من 40 نانومتر) ونانو الألومينا (80 نانومتر) و كذلك تم أستعمال أسمنت عالي المقاومة من الصنف ( ) حيث تمت دراسة تأثير هذه المواد على مقاومة الانضغاط، زمن التثخن، نسبة الماء الحر، الكثافة و على صفات الانسيابية لعجينة الأسمنت. أظهرت النتائج المختبرية ان المواد النانوية المضافة تتصرف كمعجلات لزمن التصلب و تعمل على زيادة مقاومة الانضغاط لصخرة الأسمنت عند درجة حرارة 38 درجة مئوية و لكن هذه الزيادة تتغير عند زيادة الحرارة الى 60 درجة مئوية. كذلك فأن أضافة المواد النانوية أدى الى زيادة معاملات الخواص الأنسيابية والى أنخفاض نسبة الماء الحر لعجينة الأسمنت بينما كان التغير في الكثافة قليل جدا. وفقا لنتائج ال R2فأن موديل Power Law يعطي أفضل تطابق لتمثيل الخواص الانسيابية بالمقارنة مع الموديلات الاخرى. أظهرت النتائج أن تأثير نانو الألومينا على مقاومة الانضغاط و زمن التثخن هو أكبر من تأثير نانو السيليكا ولكن تأثير نانو السيليكا على نسبة الماء الحر والصفات الانسيابية أكبر من تأثير نانو الألومينا.} }